Should breaking down something like a door be adjudicated as an attempt to beat its AC and HP, or as an...





.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ margin-bottom:0;
}







25












$begingroup$


It is not uncommon for players to encounter a door that resists being opened - the door may be stuck, barred, locked, barricaded, etc. A locked door could be unlocked by finding a key or passing a Difficulty Check to pick the lock, or it could be broken down.



In the D&D 5e Dungeon Master’s Guide page 237, the examples for when a strength ability check might be used are: “Smash down a door, move a boulder, use a spike to wedge a door shut”. Which seems fine - set a DC and see if the player can beat it with Strength check. This seems to be confirmed by the Player’s Handbook page 176, again in reference to when a Strength check may be used: “Force open a stuck, locked, or barred door”.



However, page 246 of the DMG also details object Armour Class and Hit Points. One could argue that a door is considered to be an object (at least, as much as a wall is considered to be an object by the book). Lets say the door is made of wood, its a medium sized object and it is resilient, so it has an AC of 15 and 18 Hit Points. When the door reaches 0 HP, it opens.



When would it be appropriate to use the AC and hit points of a door to determine if it opens versus setting a DC Strength check?



For the purposes of this question, assume there is always a chance for success and a risk of failure, there are no automatic successes or failures. Also assume that the players are determined to break the door, they are not interested in looking for ways around it - the door will be broken and open eventually, it is more a case of what method should be used to determine when the door opens.




Note that although this question is specifically asking about breaking doors, it would apply to any situation where it might be appropriate to use either an AC or a DC to break something. I have simply used doors as my example as they are one of the most likely and most common things a player may try to break.






dnd-5e gm-techniques damage actions







share|improve this question











$endgroup$










  • 3




    $begingroup$
    Related: What's the point of having a locked door if the players can just destroy it?
    $endgroup$
    – Rubiksmoose♦
    May 24 at 14:20






  • 2




    $begingroup$
    Note that just because the door is destroyed doesn't mean that the path is open - it could just be very damaged and no longer operable, or that there's a panel missing. If the goal is to open a path, the hp might have to be higher than the dmg states.
    $endgroup$
    – Spitemaster
    May 24 at 21:14






  • 1




    $begingroup$
    Doors should probably be immune to piercing damage...
    $endgroup$
    – Nacht
    May 25 at 11:08






  • 1




    $begingroup$
    @Nacht You’re probably right, from the DMG page 247: “Objects and Damage Types. Objects are immune to poison and psychic damage. You might decide that some damage types are more effective against a particular object or substance than others. For example, bludgeoning damage works well for smashing things but not for cutting through rope or leather. Paper or cloth objects might be vulnerable to fire and lightning damage. A pick can chip away stone but can't effectively cut down a tree. As always, use your best judgment.” So there is precedent for it in the rules.
    $endgroup$
    – Liam Morris
    May 25 at 11:12






  • 1




    $begingroup$
    Whatever the answer is, it should heavily favour STR, as this is one of those moments when you can really feel like your character is strong. Having a rogue come along and en guarde the door with a rapier until it lets them through would probably make a barbarian feel less useful. The rogue can already pick locks.
    $endgroup$
    – Nacht
    May 25 at 11:21


















25












$begingroup$


It is not uncommon for players to encounter a door that resists being opened - the door may be stuck, barred, locked, barricaded, etc. A locked door could be unlocked by finding a key or passing a Difficulty Check to pick the lock, or it could be broken down.



In the D&D 5e Dungeon Master’s Guide page 237, the examples for when a strength ability check might be used are: “Smash down a door, move a boulder, use a spike to wedge a door shut”. Which seems fine - set a DC and see if the player can beat it with Strength check. This seems to be confirmed by the Player’s Handbook page 176, again in reference to when a Strength check may be used: “Force open a stuck, locked, or barred door”.



However, page 246 of the DMG also details object Armour Class and Hit Points. One could argue that a door is considered to be an object (at least, as much as a wall is considered to be an object by the book). Lets say the door is made of wood, its a medium sized object and it is resilient, so it has an AC of 15 and 18 Hit Points. When the door reaches 0 HP, it opens.



When would it be appropriate to use the AC and hit points of a door to determine if it opens versus setting a DC Strength check?



For the purposes of this question, assume there is always a chance for success and a risk of failure, there are no automatic successes or failures. Also assume that the players are determined to break the door, they are not interested in looking for ways around it - the door will be broken and open eventually, it is more a case of what method should be used to determine when the door opens.




Note that although this question is specifically asking about breaking doors, it would apply to any situation where it might be appropriate to use either an AC or a DC to break something. I have simply used doors as my example as they are one of the most likely and most common things a player may try to break.






dnd-5e gm-techniques damage actions







share|improve this question











$endgroup$










  • 3




    $begingroup$
    Related: What's the point of having a locked door if the players can just destroy it?
    $endgroup$
    – Rubiksmoose♦
    May 24 at 14:20






  • 2




    $begingroup$
    Note that just because the door is destroyed doesn't mean that the path is open - it could just be very damaged and no longer operable, or that there's a panel missing. If the goal is to open a path, the hp might have to be higher than the dmg states.
    $endgroup$
    – Spitemaster
    May 24 at 21:14






  • 1




    $begingroup$
    Doors should probably be immune to piercing damage...
    $endgroup$
    – Nacht
    May 25 at 11:08






  • 1




    $begingroup$
    @Nacht You’re probably right, from the DMG page 247: “Objects and Damage Types. Objects are immune to poison and psychic damage. You might decide that some damage types are more effective against a particular object or substance than others. For example, bludgeoning damage works well for smashing things but not for cutting through rope or leather. Paper or cloth objects might be vulnerable to fire and lightning damage. A pick can chip away stone but can't effectively cut down a tree. As always, use your best judgment.” So there is precedent for it in the rules.
    $endgroup$
    – Liam Morris
    May 25 at 11:12






  • 1




    $begingroup$
    Whatever the answer is, it should heavily favour STR, as this is one of those moments when you can really feel like your character is strong. Having a rogue come along and en guarde the door with a rapier until it lets them through would probably make a barbarian feel less useful. The rogue can already pick locks.
    $endgroup$
    – Nacht
    May 25 at 11:21














25












25








25


3



$begingroup$


It is not uncommon for players to encounter a door that resists being opened - the door may be stuck, barred, locked, barricaded, etc. A locked door could be unlocked by finding a key or passing a Difficulty Check to pick the lock, or it could be broken down.



In the D&D 5e Dungeon Master’s Guide page 237, the examples for when a strength ability check might be used are: “Smash down a door, move a boulder, use a spike to wedge a door shut”. Which seems fine - set a DC and see if the player can beat it with Strength check. This seems to be confirmed by the Player’s Handbook page 176, again in reference to when a Strength check may be used: “Force open a stuck, locked, or barred door”.



However, page 246 of the DMG also details object Armour Class and Hit Points. One could argue that a door is considered to be an object (at least, as much as a wall is considered to be an object by the book). Lets say the door is made of wood, its a medium sized object and it is resilient, so it has an AC of 15 and 18 Hit Points. When the door reaches 0 HP, it opens.



When would it be appropriate to use the AC and hit points of a door to determine if it opens versus setting a DC Strength check?



For the purposes of this question, assume there is always a chance for success and a risk of failure, there are no automatic successes or failures. Also assume that the players are determined to break the door, they are not interested in looking for ways around it - the door will be broken and open eventually, it is more a case of what method should be used to determine when the door opens.




Note that although this question is specifically asking about breaking doors, it would apply to any situation where it might be appropriate to use either an AC or a DC to break something. I have simply used doors as my example as they are one of the most likely and most common things a player may try to break.






dnd-5e gm-techniques damage actions







share|improve this question











$endgroup$




It is not uncommon for players to encounter a door that resists being opened - the door may be stuck, barred, locked, barricaded, etc. A locked door could be unlocked by finding a key or passing a Difficulty Check to pick the lock, or it could be broken down.



In the D&D 5e Dungeon Master’s Guide page 237, the examples for when a strength ability check might be used are: “Smash down a door, move a boulder, use a spike to wedge a door shut”. Which seems fine - set a DC and see if the player can beat it with Strength check. This seems to be confirmed by the Player’s Handbook page 176, again in reference to when a Strength check may be used: “Force open a stuck, locked, or barred door”.



However, page 246 of the DMG also details object Armour Class and Hit Points. One could argue that a door is considered to be an object (at least, as much as a wall is considered to be an object by the book). Lets say the door is made of wood, its a medium sized object and it is resilient, so it has an AC of 15 and 18 Hit Points. When the door reaches 0 HP, it opens.



When would it be appropriate to use the AC and hit points of a door to determine if it opens versus setting a DC Strength check?



For the purposes of this question, assume there is always a chance for success and a risk of failure, there are no automatic successes or failures. Also assume that the players are determined to break the door, they are not interested in looking for ways around it - the door will be broken and open eventually, it is more a case of what method should be used to determine when the door opens.




Note that although this question is specifically asking about breaking doors, it would apply to any situation where it might be appropriate to use either an AC or a DC to break something. I have simply used doors as my example as they are one of the most likely and most common things a player may try to break.






dnd-5e gm-techniques damage actions




dnd-5e gm-techniques damage actions






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited May 24 at 20:49









V2Blast♦

33.4k5 gold badges121 silver badges208 bronze badges




33.4k5 gold badges121 silver badges208 bronze badges










asked May 24 at 11:22









Liam MorrisLiam Morris

3,08511 silver badges40 bronze badges




3,08511 silver badges40 bronze badges











  • 3




    $begingroup$
    Related: What's the point of having a locked door if the players can just destroy it?
    $endgroup$
    – Rubiksmoose♦
    May 24 at 14:20






  • 2




    $begingroup$
    Note that just because the door is destroyed doesn't mean that the path is open - it could just be very damaged and no longer operable, or that there's a panel missing. If the goal is to open a path, the hp might have to be higher than the dmg states.
    $endgroup$
    – Spitemaster
    May 24 at 21:14






  • 1




    $begingroup$
    Doors should probably be immune to piercing damage...
    $endgroup$
    – Nacht
    May 25 at 11:08






  • 1




    $begingroup$
    @Nacht You’re probably right, from the DMG page 247: “Objects and Damage Types. Objects are immune to poison and psychic damage. You might decide that some damage types are more effective against a particular object or substance than others. For example, bludgeoning damage works well for smashing things but not for cutting through rope or leather. Paper or cloth objects might be vulnerable to fire and lightning damage. A pick can chip away stone but can't effectively cut down a tree. As always, use your best judgment.” So there is precedent for it in the rules.
    $endgroup$
    – Liam Morris
    May 25 at 11:12






  • 1




    $begingroup$
    Whatever the answer is, it should heavily favour STR, as this is one of those moments when you can really feel like your character is strong. Having a rogue come along and en guarde the door with a rapier until it lets them through would probably make a barbarian feel less useful. The rogue can already pick locks.
    $endgroup$
    – Nacht
    May 25 at 11:21














  • 3




    $begingroup$
    Related: What's the point of having a locked door if the players can just destroy it?
    $endgroup$
    – Rubiksmoose♦
    May 24 at 14:20






  • 2




    $begingroup$
    Note that just because the door is destroyed doesn't mean that the path is open - it could just be very damaged and no longer operable, or that there's a panel missing. If the goal is to open a path, the hp might have to be higher than the dmg states.
    $endgroup$
    – Spitemaster
    May 24 at 21:14






  • 1




    $begingroup$
    Doors should probably be immune to piercing damage...
    $endgroup$
    – Nacht
    May 25 at 11:08






  • 1




    $begingroup$
    @Nacht You’re probably right, from the DMG page 247: “Objects and Damage Types. Objects are immune to poison and psychic damage. You might decide that some damage types are more effective against a particular object or substance than others. For example, bludgeoning damage works well for smashing things but not for cutting through rope or leather. Paper or cloth objects might be vulnerable to fire and lightning damage. A pick can chip away stone but can't effectively cut down a tree. As always, use your best judgment.” So there is precedent for it in the rules.
    $endgroup$
    – Liam Morris
    May 25 at 11:12






  • 1




    $begingroup$
    Whatever the answer is, it should heavily favour STR, as this is one of those moments when you can really feel like your character is strong. Having a rogue come along and en guarde the door with a rapier until it lets them through would probably make a barbarian feel less useful. The rogue can already pick locks.
    $endgroup$
    – Nacht
    May 25 at 11:21








3




3




$begingroup$
Related: What's the point of having a locked door if the players can just destroy it?
$endgroup$
– Rubiksmoose♦
May 24 at 14:20




$begingroup$
Related: What's the point of having a locked door if the players can just destroy it?
$endgroup$
– Rubiksmoose♦
May 24 at 14:20




2




2




$begingroup$
Note that just because the door is destroyed doesn't mean that the path is open - it could just be very damaged and no longer operable, or that there's a panel missing. If the goal is to open a path, the hp might have to be higher than the dmg states.
$endgroup$
– Spitemaster
May 24 at 21:14




$begingroup$
Note that just because the door is destroyed doesn't mean that the path is open - it could just be very damaged and no longer operable, or that there's a panel missing. If the goal is to open a path, the hp might have to be higher than the dmg states.
$endgroup$
– Spitemaster
May 24 at 21:14




1




1




$begingroup$
Doors should probably be immune to piercing damage...
$endgroup$
– Nacht
May 25 at 11:08




$begingroup$
Doors should probably be immune to piercing damage...
$endgroup$
– Nacht
May 25 at 11:08




1




1




$begingroup$
@Nacht You’re probably right, from the DMG page 247: “Objects and Damage Types. Objects are immune to poison and psychic damage. You might decide that some damage types are more effective against a particular object or substance than others. For example, bludgeoning damage works well for smashing things but not for cutting through rope or leather. Paper or cloth objects might be vulnerable to fire and lightning damage. A pick can chip away stone but can't effectively cut down a tree. As always, use your best judgment.” So there is precedent for it in the rules.
$endgroup$
– Liam Morris
May 25 at 11:12




$begingroup$
@Nacht You’re probably right, from the DMG page 247: “Objects and Damage Types. Objects are immune to poison and psychic damage. You might decide that some damage types are more effective against a particular object or substance than others. For example, bludgeoning damage works well for smashing things but not for cutting through rope or leather. Paper or cloth objects might be vulnerable to fire and lightning damage. A pick can chip away stone but can't effectively cut down a tree. As always, use your best judgment.” So there is precedent for it in the rules.
$endgroup$
– Liam Morris
May 25 at 11:12




1




1




$begingroup$
Whatever the answer is, it should heavily favour STR, as this is one of those moments when you can really feel like your character is strong. Having a rogue come along and en guarde the door with a rapier until it lets them through would probably make a barbarian feel less useful. The rogue can already pick locks.
$endgroup$
– Nacht
May 25 at 11:21




$begingroup$
Whatever the answer is, it should heavily favour STR, as this is one of those moments when you can really feel like your character is strong. Having a rogue come along and en guarde the door with a rapier until it lets them through would probably make a barbarian feel less useful. The rogue can already pick locks.
$endgroup$
– Nacht
May 25 at 11:21










6 Answers
6






active

oldest

votes


















30












$begingroup$

In my interpretation, the AC VS DC thing depends on how the PC would like to open the door.



DC would mean the character wants to keep the door whole, but just get rid of whatever would stop the door from opening (like the small metal part of a lock sliding into the side of a wall or a wooden bar behind it). This might leave the door damaged, but still usable (depending on the lock method).



AC would mean a player attacks the door, so they would just physically destroy it, which I would just describe as a player trying to return a wooden door back to some planks with nails sticking out or something similar.






share|improve this answer









$endgroup$















  • $begingroup$
    With your first example, surely then you have damaged the door which may warrant determining how many hit points it has left? Also, what is the difference then between keeping the door whole using the DC method versus the players damaging the Hit Points of the lock or door bar? Both methods may require the lock or bar to be completely destroyed or rendered unusable before the door could open.
    $endgroup$
    – Liam Morris
    May 24 at 11:56










  • $begingroup$
    Let me try and make the segregation I use clear: AC: Players attack the door itself and want entry by just getting fully rid of the door. In this case, a door would be rendered broken beyond repair, leaving nothing but unusable chuncks of wood behind | DC: The player tries to force the lock, breaking the lock itself, or the wooden bar that's blocking it for instance. If you decide to rule that the lock is stronger then the door, use AC since in these cases the door would break before the lock.
    $endgroup$
    – Jared Posch
    May 24 at 12:05












  • $begingroup$
    Would it not also make sense to use AC in the case of the lock thats keeping the door closed though? DMG page 247 uses a lock as an example of a tiny object: “Tiny (bottle, lock)”
    $endgroup$
    – Liam Morris
    May 24 at 12:10










  • $begingroup$
    You could opt to do so, however, does that mean your players are attacking a lock? Locks are insanely small and cannot really be targeted for attack, so I would just go for a DC since they just want to make a check that breaks it. There is (at least for modern locks) not really a state between "functional" and " broken" for locks, unless your players have some sort of saw that could saw through metal. AC would say there is due to the presence of HP.
    $endgroup$
    – Jared Posch
    May 24 at 12:33






  • 1




    $begingroup$
    In those cases, I would look at the accessibility of the lock, aka, can the players actually attack the lock. A door locked with a wooden beam would mean the beam is behind the door, so unless a player can accurately swing his sword down the middle, I'd say they don't do damage. The same goes for " regular" locks. For padlocks, I would rule that the players can opt to attack the lock, assuming it is on their side of the door. Otherwise, the same principles apply in my opinion.
    $endgroup$
    – Jared Posch
    May 24 at 12:52



















13












$begingroup$

Both are appropriate for different circumstances



The description of how the player wishes to open the door is key. Typically if they wish to 'Smash down a door' - i.e. break it off of it's hinges, a strength check would be the appropriate choice, with a DC determined by the DM according to the description of the door.



If the PC wishes to directly attack and damage the door itself, then AC should be used to determine if they're capable of dealing sufficient damage.



One caveat of letting a PC use AC to attack a door however, is that they'd eventually be able to break even the strongest of doors with enough attacks. If you don't wish the door to be eventually broken into by anybody - a strength check is a single determination of whether a PC is capable of it or not.






share|improve this answer









$endgroup$











  • 11




    $begingroup$
    Addressing your last paragraph, page 247 of the DMG refers to a “damage threshold” which means that an object is immune to all damage unless it exceeds a certain amount from a single attack, in which case it takes damage normally. This means the door could be more resistant to damage than you may think.
    $endgroup$
    – Liam Morris
    May 24 at 11:40








  • 1




    $begingroup$
    @LiamMorris iirc the Damage threshold rule is written as optional unless the object is Large? But nonetheless yeah I agree - that is a good way around it. The main point still applies though that one is forcing the door open through normal function, and the other is destroying it regardless of function.
    $endgroup$
    – Whambulance
    May 24 at 11:52






  • 2




    $begingroup$
    Perhaps worth noting: some published adventures explicitly call out that a properly fortified door cannot be kicked in with a Strength Check, and must instead be destroyed by attacking it. The most recent example being in Ghosts of Saltmarsh. dndbeyond.com/sources/gos/tammerauts-fate#ReinforcingtheDoors
    $endgroup$
    – guildsbounty
    May 24 at 13:03










  • $begingroup$
    I'm not sure I agree with that last paragraph entirely. Unless you have set the DC so high the PC cannot succeed even on a 20, one failure could just lead to more attempts. So the consequences of failure are similar. PCs might get caught by guards or alert whatever is behind the door, etc. Only difference is one case can lead to progressively getting closer, the other is a series of binary success/failure attempts.
    $endgroup$
    – Jim Cullen
    May 27 at 3:43






  • 1




    $begingroup$
    My interpretation of that part of your answer was that you were implying if a PC tries once and fails (when you're using a DC), then they cannot try again. I would disagree with that sentiment. If that was not your intent, then I apologise; I don't disagree with you at all.
    $endgroup$
    – Jim Cullen
    May 27 at 23:05



















12












$begingroup$

It depends on the Situation



Is there a penalty for failure, and how detailed do we really need to be?



Scenario 1



If your party is in the middle of a combat and needs to break through a door, then how long it takes them matters just as much as how hard they hit. There is definitely a penalty for failure here, and as it is combat, and thus a tense situation where every action matters, we want to be detailed. Thus, use AC and hit points.



Scenario 2



If your party is not threatened, has plenty of time, and there is no penalty for failure, you don't even need to roll. Look at the proposed DC, look at the characters and how they intend to do it and make a judgement call. If they have any chance of success, they'll get there eventually so just narrate it happening. If there is no chance of them achieving it, perhaps because they're all Strength 8 wizards with just their fists against a locked iron door, then you just tell them they have no chance.



Scenario 3



But what if there is a penalty for failure? Maybe there's some unsuspecting monsters on the other side, who could be taken by surprise if you successfully kick the door down on the first attempt, but will be able to react if it takes longer. We could make attacks against the door until it breaks, and decide that if the players do not break the door in X turns then the monsters will have had time to prepare a defence. But in practice, all this will turn into is a bunch of meaningless dice throws. Nothing has changed from the players' point of view, so they're just going to keep hitting the door again, and again, and again, until the door breaks. That is a boring waste of precious table time.



So instead, roll against the DC. If your players make the roll, they did it quickly enough that the monsters are still napping, playing cards or whatever. If they fail, they had to hit the thing enough times that the monsters were able to ready a defence.



In conclusion



Don't roll the dice any more than you need to. If there is no penalty for failure and a chance to succeed, give it to them. If the failure doesn't get any worse if they repeatedly fail, just roll once against the DC. If it really does matter exactly how long it takes to break the door, and you really need to know exactly how many hits it will take then, and only then, use AC and hit points.



A caveat is if your players want to give the door an opportunistic kick, just to see if it'll open, without investing all the time necessary to guarantee that the door breaks. In this case, roll the DC once. If they make it, great! If they don't then anyone on the other side knows they are there, so you don't need to bother rolling again.






share|improve this answer











$endgroup$























    3












    $begingroup$

    They both solve the same problem



    Both DC and AC handle the same situation, they just have different ways of handling it. There is no right or wrong choice in which to do. The choice should be made considering what feels right for the encounter, what the DM/players prefer, and the skill set of the party involved.



    When to use DC



    DC tends to be the simpler solution. Typically breaking down a door requires one roll per attempt and without HP there are less numbers to keep track of. This makes the encounters more streamlined and feel fluid. I have found that using DC tends to be more cinematic and players who enjoy the role-play prefer this option.



    Against stronger doors you could even create a situation with sequential DCs they need to beat to break it down. For example, an iron door would be much harder to break down by brute force, but that won't stop the barbarian from trying! Set the door with 3 DCs to beat. I opt for starting with a high DC then lowering the following checks as the door takes mores damage. The first cause the door to bulge, the second breaks the hinges and bends the door, the third rips the door off the hinges and sends it flying into the room.



    When to use AC



    AC has more factors to consider. Treating a door as an object you have to consider its HP, its AC, and any damage reductions it may have. It also helps when your party overall has a low strength save and beating strength DCs is difficult and takes multiple attempts. This also enables casters and non-melee characters to help break down the door. Players who enjoy number crunching or parties with low strength checks would likely prefer this solution.



    When you have stronger doors and it is unrealistic to break them down with brute strength, it's more appropriated to stat the wall with AC/HP. Giving a door more HP, a higher AC, or modifying its damage reduction is an easy way to increase their difficulty.



    Also I've ran sessions with people who hold grudges against doors and watching the HP of a door whittle down until it eventually breaks gives them an odd sense of satisfaction.




    This answer is based on encounters in sessions I have ran or played in. My opinion based on my personal experiences and are by no means a large study. There are times when I use both methods, but my preference is to use DC.






    share|improve this answer









    $endgroup$























      2












      $begingroup$

      I always change it based on what the door is made of and what the players is doing.



      If the player says they are going to shoulder check the door that is obviously a strength check if they say they are going to use an axe to chop through the door that is attacking the door. I never let my players just say "I am going to try to break the door down" my immediate response is "How? How are you trying to break it"



      But I limit what the players can do (or at least what works, hey you can try anything) based on the door material. You are not chopping through an iron door no matter how many times you hit it with the axe, the object damage rules support this with something called a damage threshold and damage immunities. For instance I always rule slashing don't work on stone or at least not unless you are doing at least 30 points of damage with each attack, so generally a strength checks are all that is possible. A stone door might be possible to break with a hammer or heavy pick but almost no other weapon is going to leave a mark but a strength check is always possible even if impossibly high. this mechanic is great for mitigating what I call tomfoolery, like players attempting to cut a rope with a sling or club or trying to smash down a wooden door with a rapier.



      A homebrew thing I sometimes do is say every attack does 1 point of damage to the weapon or 1d2-1 if it is an very sturdy weapon, this keeps players from just always relying on breaking things down, now they might destroy their weapon if they get unlikely with their rolls to chop through the door. Usually I save this for sturdy objects like metal or stone, but wood might be appropriate if the players are trying to dig their way through a iron bound wooden door with a sword or a low level monk tries to punch their way though an solid oak door. It makes the layers stop and think which is always a plus.






      share|improve this answer









      $endgroup$























        1












        $begingroup$

        In Moments of Building Tension



        Whilst it may be better to abstract the damage as User Kyyshack said in a comment:




        If they roll an attack, what will players do if they don't get through in the first hit? Nothing has really changed so they'll just hit the door again. And Again. And Again. Until the door is broken. That's super boring and wastes time. It's much better to abstract that boring time away behind a single roll against a DC that will answer your question of "Do they break through quickly enough to catch the monsters off guard?"




        Using the rules for Object AC and Hit Points could be useful to help build tension. Rather than having the PC’s roll over and over again, you could have monsters roll to see if they damage a door the PC’s are on the other side of. Seeing creatures claw through a door or ripping boards off it would create more tension than if they rolled a nat 20 and broke it down in a single turn. The former option might allow players more time to react to the issue and respond to it, such as by barricading the door, escaping, preparing an ambush, etc.



        Additionally, having rickety old damaged doors or furniture can help to establish a theme. If players find a door that has already been damaged, they may want to investigate what caused it, and if that thing is still around. For example, if they found a door with a large axe wound in the middle of it like something out The Shining, players may wonder who was trying to get into this room, and why? Or, if they stumbled upon a door with a dozen puncture wounds in it like it was repeatedly stabbed by a dagger, they may investigate the cause - or not, but they’ll learn pretty quickly what caused those holes when they get hit in the back of the head by a falling flail trap.



        Partial Opening



        Thanks to user Jared Posch for highlighting the idea of accessibility in their comment:




        I would look at the accessibility of the lock, aka, can the players actually attack the lock. A door locked with a wooden beam would mean the beam is behind the door, so unless a player can accurately swing his sword down the middle, I'd say they don't do damage




        Rather than players having to completely open a door (such as by destroying it completely or by bashing through the door with a DC Strength check), players might partially damage a door.




        • For example, players might cut a hole around the locking mechanism to open a door, leaving it damaged but mostly intact - perhaps only removing 1 or 2 HP from the door.


        • Or, players may cut a hole in the door, creating an opening large enough for a Small creature to go through (or a Medium sized creature if they squeeze through the hole). This could be useful if they know they are being chased by Large creatures as it would slow them down. Alternatively, Small creatures like Kobolds might make holes in locked doors as it would slow down Medium sized creatures, hinger Large creatures but would not affect Small creatures like themselves (or they could make Tiny holes so they could squeeze through but larger creatures wouldn’t be able to).


        • Players may even put a hole in the door to gain access to the lock or door bar on the other side, allowing the door to be easily unlocked.



        Treat the door as though it was made up of smaller objects. So, whilst you may need to remove 18 HP to destroy a Medium sized resilient door completely, you may only take off 5 HP to put a Tiny hole in it or 10 to put a Small hole in it.



        Reinforced Doors



        User guildsbounty helpfully pointed out:




        Perhaps worth noting: some published adventures explicitly call out that a properly fortified door cannot be kicked in with a Strength Check, and must instead be destroyed by attacking it. The most recent example being in Ghosts of Saltmarsh.




        Having this clear distinction for Reinforced doors could be quite a useful tool. It may force players to make a decision between completely breaking this door, which would be very noisy and may take a long while, or finding another way through it. Here is what the Ghosts of Saltmarsh says about reinforced doors, page 157:




        It takes a character 1 hour to gather the required materials and reinforce one door. The time is cut in half if another character helps.
        A reinforced door cannot be broken through with a Strength check, but must be battered down (AC 15, 30 hit points, immunity to poison and psychic damage)




        Note that this rule is assuming the door is made out of wood, is being reinforced with wooden planks and nails and these materials are readily available.



        A possible way to calculate the health of a reinforced door is to add the health of the reinforcing objects to it and use the highest AC. For example, a Medium Resilient wood door (AC 15, HP 20) is being reinforced with Small Resilient planks of wood (AC 15, HP 10). The highest AC is 15 so the door has an AC of 15, 20 HP plus 10 HP equals 30 HP, giving us AC 15, HP 30 for the reinforced door in question. If we were using steel bars to reinforce the door instead, as they have an AC of 19, we would instead have AC 19, HP 30 for the reinforced door.



        So then, one possible situation where you would use AC and HP over a DC check is when a door has been reinforced, either by the players or by the inhabitants of a dungeon.



        Hitting Creatures Behind Cover



        This follows up from the idea of partial opening. I got a bit carried away but this highlights how object AC could be used in a completely different way than how a DC check is used:



        A creature can use any suitably large object as cover from an attack. A creature gains bonuses to their AC and Dexterity saving throws depending on the level of cover. A creature in total cover gains the bonus of it not being able to be targeted directly.



        If, for the purposes of an attack, we treat the door as a creature, we can use the Cleave Through Creatures optional rule in the DMG page 272:




        When a melee attack reduces an undamaged creature to 0 hit points, any excess damage from that attack might carry over to another creature nearby. The attacker targets another creature within reach and, if the original attack roll can hit it, applies any remaining damage to it




        So, using the example of a door, its a Medium sized resilient object made of wood, so it has 15 AC and 18 HP. However, we are targeting a Tiny section of it, so the AC is 15 and the HP is only 5. The attacker rolls a 16 and deals 7 damage, this hits the Tiny section of the door and reduces it to 0 HP. As we are using the Cleave Through Creatures rule, the attacker still has 2 damage left over which can be used to hit a creature within range (such as one who was standing right behind the door).



        Because the weapon has now gone through the cover, the creature is no longer in cover for the purpose of this attack - just to be clear, any bonuses for cover (such as increased AC, better Dex Saving Throws or being untargetable) the creature had are being ignored by this attack.



        If the 16 rolled by the attacker earlier to hit the door is enough to hit the creature behind the door (without any bonuses from cover) they will take the remaining 2 damage. If the creature had an AC of 17 though they would manage to avoid any damage.



        This rule would make more sense when applied against a creature behind a fragile material, such as glass. (Due to glass only having an AC of 13 and being fragile, a Tiny section of that might only have 2 HP, meaning more damage is transferred to the target). It also makes sense thematically, Rules as Written would say standing behind a glass window or a curtain or even pulling the bedsheets over your head would count as cover, they might even count as Total cover, preventing the creature from being targetted. However, by using the Cleave Through Creatures rule in this way, we can make things more realistic “that window will not stop this arrow going through”, “those curtains or those bedsheets aren’t going to stop my sword from stabbing you”.






        share|improve this answer











        $endgroup$


















          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "122"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: false,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: null,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          noCode: true, onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });














          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2frpg.stackexchange.com%2fquestions%2f148590%2fshould-breaking-down-something-like-a-door-be-adjudicated-as-an-attempt-to-beat%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          6 Answers
          6






          active

          oldest

          votes








          6 Answers
          6






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes









          30












          $begingroup$

          In my interpretation, the AC VS DC thing depends on how the PC would like to open the door.



          DC would mean the character wants to keep the door whole, but just get rid of whatever would stop the door from opening (like the small metal part of a lock sliding into the side of a wall or a wooden bar behind it). This might leave the door damaged, but still usable (depending on the lock method).



          AC would mean a player attacks the door, so they would just physically destroy it, which I would just describe as a player trying to return a wooden door back to some planks with nails sticking out or something similar.






          share|improve this answer









          $endgroup$















          • $begingroup$
            With your first example, surely then you have damaged the door which may warrant determining how many hit points it has left? Also, what is the difference then between keeping the door whole using the DC method versus the players damaging the Hit Points of the lock or door bar? Both methods may require the lock or bar to be completely destroyed or rendered unusable before the door could open.
            $endgroup$
            – Liam Morris
            May 24 at 11:56










          • $begingroup$
            Let me try and make the segregation I use clear: AC: Players attack the door itself and want entry by just getting fully rid of the door. In this case, a door would be rendered broken beyond repair, leaving nothing but unusable chuncks of wood behind | DC: The player tries to force the lock, breaking the lock itself, or the wooden bar that's blocking it for instance. If you decide to rule that the lock is stronger then the door, use AC since in these cases the door would break before the lock.
            $endgroup$
            – Jared Posch
            May 24 at 12:05












          • $begingroup$
            Would it not also make sense to use AC in the case of the lock thats keeping the door closed though? DMG page 247 uses a lock as an example of a tiny object: “Tiny (bottle, lock)”
            $endgroup$
            – Liam Morris
            May 24 at 12:10










          • $begingroup$
            You could opt to do so, however, does that mean your players are attacking a lock? Locks are insanely small and cannot really be targeted for attack, so I would just go for a DC since they just want to make a check that breaks it. There is (at least for modern locks) not really a state between "functional" and " broken" for locks, unless your players have some sort of saw that could saw through metal. AC would say there is due to the presence of HP.
            $endgroup$
            – Jared Posch
            May 24 at 12:33






          • 1




            $begingroup$
            In those cases, I would look at the accessibility of the lock, aka, can the players actually attack the lock. A door locked with a wooden beam would mean the beam is behind the door, so unless a player can accurately swing his sword down the middle, I'd say they don't do damage. The same goes for " regular" locks. For padlocks, I would rule that the players can opt to attack the lock, assuming it is on their side of the door. Otherwise, the same principles apply in my opinion.
            $endgroup$
            – Jared Posch
            May 24 at 12:52
















          30












          $begingroup$

          In my interpretation, the AC VS DC thing depends on how the PC would like to open the door.



          DC would mean the character wants to keep the door whole, but just get rid of whatever would stop the door from opening (like the small metal part of a lock sliding into the side of a wall or a wooden bar behind it). This might leave the door damaged, but still usable (depending on the lock method).



          AC would mean a player attacks the door, so they would just physically destroy it, which I would just describe as a player trying to return a wooden door back to some planks with nails sticking out or something similar.






          share|improve this answer









          $endgroup$















          • $begingroup$
            With your first example, surely then you have damaged the door which may warrant determining how many hit points it has left? Also, what is the difference then between keeping the door whole using the DC method versus the players damaging the Hit Points of the lock or door bar? Both methods may require the lock or bar to be completely destroyed or rendered unusable before the door could open.
            $endgroup$
            – Liam Morris
            May 24 at 11:56










          • $begingroup$
            Let me try and make the segregation I use clear: AC: Players attack the door itself and want entry by just getting fully rid of the door. In this case, a door would be rendered broken beyond repair, leaving nothing but unusable chuncks of wood behind | DC: The player tries to force the lock, breaking the lock itself, or the wooden bar that's blocking it for instance. If you decide to rule that the lock is stronger then the door, use AC since in these cases the door would break before the lock.
            $endgroup$
            – Jared Posch
            May 24 at 12:05












          • $begingroup$
            Would it not also make sense to use AC in the case of the lock thats keeping the door closed though? DMG page 247 uses a lock as an example of a tiny object: “Tiny (bottle, lock)”
            $endgroup$
            – Liam Morris
            May 24 at 12:10










          • $begingroup$
            You could opt to do so, however, does that mean your players are attacking a lock? Locks are insanely small and cannot really be targeted for attack, so I would just go for a DC since they just want to make a check that breaks it. There is (at least for modern locks) not really a state between "functional" and " broken" for locks, unless your players have some sort of saw that could saw through metal. AC would say there is due to the presence of HP.
            $endgroup$
            – Jared Posch
            May 24 at 12:33






          • 1




            $begingroup$
            In those cases, I would look at the accessibility of the lock, aka, can the players actually attack the lock. A door locked with a wooden beam would mean the beam is behind the door, so unless a player can accurately swing his sword down the middle, I'd say they don't do damage. The same goes for " regular" locks. For padlocks, I would rule that the players can opt to attack the lock, assuming it is on their side of the door. Otherwise, the same principles apply in my opinion.
            $endgroup$
            – Jared Posch
            May 24 at 12:52














          30












          30








          30





          $begingroup$

          In my interpretation, the AC VS DC thing depends on how the PC would like to open the door.



          DC would mean the character wants to keep the door whole, but just get rid of whatever would stop the door from opening (like the small metal part of a lock sliding into the side of a wall or a wooden bar behind it). This might leave the door damaged, but still usable (depending on the lock method).



          AC would mean a player attacks the door, so they would just physically destroy it, which I would just describe as a player trying to return a wooden door back to some planks with nails sticking out or something similar.






          share|improve this answer









          $endgroup$



          In my interpretation, the AC VS DC thing depends on how the PC would like to open the door.



          DC would mean the character wants to keep the door whole, but just get rid of whatever would stop the door from opening (like the small metal part of a lock sliding into the side of a wall or a wooden bar behind it). This might leave the door damaged, but still usable (depending on the lock method).



          AC would mean a player attacks the door, so they would just physically destroy it, which I would just describe as a player trying to return a wooden door back to some planks with nails sticking out or something similar.







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered May 24 at 11:30









          Jared PoschJared Posch

          4491 silver badge6 bronze badges




          4491 silver badge6 bronze badges















          • $begingroup$
            With your first example, surely then you have damaged the door which may warrant determining how many hit points it has left? Also, what is the difference then between keeping the door whole using the DC method versus the players damaging the Hit Points of the lock or door bar? Both methods may require the lock or bar to be completely destroyed or rendered unusable before the door could open.
            $endgroup$
            – Liam Morris
            May 24 at 11:56










          • $begingroup$
            Let me try and make the segregation I use clear: AC: Players attack the door itself and want entry by just getting fully rid of the door. In this case, a door would be rendered broken beyond repair, leaving nothing but unusable chuncks of wood behind | DC: The player tries to force the lock, breaking the lock itself, or the wooden bar that's blocking it for instance. If you decide to rule that the lock is stronger then the door, use AC since in these cases the door would break before the lock.
            $endgroup$
            – Jared Posch
            May 24 at 12:05












          • $begingroup$
            Would it not also make sense to use AC in the case of the lock thats keeping the door closed though? DMG page 247 uses a lock as an example of a tiny object: “Tiny (bottle, lock)”
            $endgroup$
            – Liam Morris
            May 24 at 12:10










          • $begingroup$
            You could opt to do so, however, does that mean your players are attacking a lock? Locks are insanely small and cannot really be targeted for attack, so I would just go for a DC since they just want to make a check that breaks it. There is (at least for modern locks) not really a state between "functional" and " broken" for locks, unless your players have some sort of saw that could saw through metal. AC would say there is due to the presence of HP.
            $endgroup$
            – Jared Posch
            May 24 at 12:33






          • 1




            $begingroup$
            In those cases, I would look at the accessibility of the lock, aka, can the players actually attack the lock. A door locked with a wooden beam would mean the beam is behind the door, so unless a player can accurately swing his sword down the middle, I'd say they don't do damage. The same goes for " regular" locks. For padlocks, I would rule that the players can opt to attack the lock, assuming it is on their side of the door. Otherwise, the same principles apply in my opinion.
            $endgroup$
            – Jared Posch
            May 24 at 12:52


















          • $begingroup$
            With your first example, surely then you have damaged the door which may warrant determining how many hit points it has left? Also, what is the difference then between keeping the door whole using the DC method versus the players damaging the Hit Points of the lock or door bar? Both methods may require the lock or bar to be completely destroyed or rendered unusable before the door could open.
            $endgroup$
            – Liam Morris
            May 24 at 11:56










          • $begingroup$
            Let me try and make the segregation I use clear: AC: Players attack the door itself and want entry by just getting fully rid of the door. In this case, a door would be rendered broken beyond repair, leaving nothing but unusable chuncks of wood behind | DC: The player tries to force the lock, breaking the lock itself, or the wooden bar that's blocking it for instance. If you decide to rule that the lock is stronger then the door, use AC since in these cases the door would break before the lock.
            $endgroup$
            – Jared Posch
            May 24 at 12:05












          • $begingroup$
            Would it not also make sense to use AC in the case of the lock thats keeping the door closed though? DMG page 247 uses a lock as an example of a tiny object: “Tiny (bottle, lock)”
            $endgroup$
            – Liam Morris
            May 24 at 12:10










          • $begingroup$
            You could opt to do so, however, does that mean your players are attacking a lock? Locks are insanely small and cannot really be targeted for attack, so I would just go for a DC since they just want to make a check that breaks it. There is (at least for modern locks) not really a state between "functional" and " broken" for locks, unless your players have some sort of saw that could saw through metal. AC would say there is due to the presence of HP.
            $endgroup$
            – Jared Posch
            May 24 at 12:33






          • 1




            $begingroup$
            In those cases, I would look at the accessibility of the lock, aka, can the players actually attack the lock. A door locked with a wooden beam would mean the beam is behind the door, so unless a player can accurately swing his sword down the middle, I'd say they don't do damage. The same goes for " regular" locks. For padlocks, I would rule that the players can opt to attack the lock, assuming it is on their side of the door. Otherwise, the same principles apply in my opinion.
            $endgroup$
            – Jared Posch
            May 24 at 12:52
















          $begingroup$
          With your first example, surely then you have damaged the door which may warrant determining how many hit points it has left? Also, what is the difference then between keeping the door whole using the DC method versus the players damaging the Hit Points of the lock or door bar? Both methods may require the lock or bar to be completely destroyed or rendered unusable before the door could open.
          $endgroup$
          – Liam Morris
          May 24 at 11:56




          $begingroup$
          With your first example, surely then you have damaged the door which may warrant determining how many hit points it has left? Also, what is the difference then between keeping the door whole using the DC method versus the players damaging the Hit Points of the lock or door bar? Both methods may require the lock or bar to be completely destroyed or rendered unusable before the door could open.
          $endgroup$
          – Liam Morris
          May 24 at 11:56












          $begingroup$
          Let me try and make the segregation I use clear: AC: Players attack the door itself and want entry by just getting fully rid of the door. In this case, a door would be rendered broken beyond repair, leaving nothing but unusable chuncks of wood behind | DC: The player tries to force the lock, breaking the lock itself, or the wooden bar that's blocking it for instance. If you decide to rule that the lock is stronger then the door, use AC since in these cases the door would break before the lock.
          $endgroup$
          – Jared Posch
          May 24 at 12:05






          $begingroup$
          Let me try and make the segregation I use clear: AC: Players attack the door itself and want entry by just getting fully rid of the door. In this case, a door would be rendered broken beyond repair, leaving nothing but unusable chuncks of wood behind | DC: The player tries to force the lock, breaking the lock itself, or the wooden bar that's blocking it for instance. If you decide to rule that the lock is stronger then the door, use AC since in these cases the door would break before the lock.
          $endgroup$
          – Jared Posch
          May 24 at 12:05














          $begingroup$
          Would it not also make sense to use AC in the case of the lock thats keeping the door closed though? DMG page 247 uses a lock as an example of a tiny object: “Tiny (bottle, lock)”
          $endgroup$
          – Liam Morris
          May 24 at 12:10




          $begingroup$
          Would it not also make sense to use AC in the case of the lock thats keeping the door closed though? DMG page 247 uses a lock as an example of a tiny object: “Tiny (bottle, lock)”
          $endgroup$
          – Liam Morris
          May 24 at 12:10












          $begingroup$
          You could opt to do so, however, does that mean your players are attacking a lock? Locks are insanely small and cannot really be targeted for attack, so I would just go for a DC since they just want to make a check that breaks it. There is (at least for modern locks) not really a state between "functional" and " broken" for locks, unless your players have some sort of saw that could saw through metal. AC would say there is due to the presence of HP.
          $endgroup$
          – Jared Posch
          May 24 at 12:33




          $begingroup$
          You could opt to do so, however, does that mean your players are attacking a lock? Locks are insanely small and cannot really be targeted for attack, so I would just go for a DC since they just want to make a check that breaks it. There is (at least for modern locks) not really a state between "functional" and " broken" for locks, unless your players have some sort of saw that could saw through metal. AC would say there is due to the presence of HP.
          $endgroup$
          – Jared Posch
          May 24 at 12:33




          1




          1




          $begingroup$
          In those cases, I would look at the accessibility of the lock, aka, can the players actually attack the lock. A door locked with a wooden beam would mean the beam is behind the door, so unless a player can accurately swing his sword down the middle, I'd say they don't do damage. The same goes for " regular" locks. For padlocks, I would rule that the players can opt to attack the lock, assuming it is on their side of the door. Otherwise, the same principles apply in my opinion.
          $endgroup$
          – Jared Posch
          May 24 at 12:52




          $begingroup$
          In those cases, I would look at the accessibility of the lock, aka, can the players actually attack the lock. A door locked with a wooden beam would mean the beam is behind the door, so unless a player can accurately swing his sword down the middle, I'd say they don't do damage. The same goes for " regular" locks. For padlocks, I would rule that the players can opt to attack the lock, assuming it is on their side of the door. Otherwise, the same principles apply in my opinion.
          $endgroup$
          – Jared Posch
          May 24 at 12:52













          13












          $begingroup$

          Both are appropriate for different circumstances



          The description of how the player wishes to open the door is key. Typically if they wish to 'Smash down a door' - i.e. break it off of it's hinges, a strength check would be the appropriate choice, with a DC determined by the DM according to the description of the door.



          If the PC wishes to directly attack and damage the door itself, then AC should be used to determine if they're capable of dealing sufficient damage.



          One caveat of letting a PC use AC to attack a door however, is that they'd eventually be able to break even the strongest of doors with enough attacks. If you don't wish the door to be eventually broken into by anybody - a strength check is a single determination of whether a PC is capable of it or not.






          share|improve this answer









          $endgroup$











          • 11




            $begingroup$
            Addressing your last paragraph, page 247 of the DMG refers to a “damage threshold” which means that an object is immune to all damage unless it exceeds a certain amount from a single attack, in which case it takes damage normally. This means the door could be more resistant to damage than you may think.
            $endgroup$
            – Liam Morris
            May 24 at 11:40








          • 1




            $begingroup$
            @LiamMorris iirc the Damage threshold rule is written as optional unless the object is Large? But nonetheless yeah I agree - that is a good way around it. The main point still applies though that one is forcing the door open through normal function, and the other is destroying it regardless of function.
            $endgroup$
            – Whambulance
            May 24 at 11:52






          • 2




            $begingroup$
            Perhaps worth noting: some published adventures explicitly call out that a properly fortified door cannot be kicked in with a Strength Check, and must instead be destroyed by attacking it. The most recent example being in Ghosts of Saltmarsh. dndbeyond.com/sources/gos/tammerauts-fate#ReinforcingtheDoors
            $endgroup$
            – guildsbounty
            May 24 at 13:03










          • $begingroup$
            I'm not sure I agree with that last paragraph entirely. Unless you have set the DC so high the PC cannot succeed even on a 20, one failure could just lead to more attempts. So the consequences of failure are similar. PCs might get caught by guards or alert whatever is behind the door, etc. Only difference is one case can lead to progressively getting closer, the other is a series of binary success/failure attempts.
            $endgroup$
            – Jim Cullen
            May 27 at 3:43






          • 1




            $begingroup$
            My interpretation of that part of your answer was that you were implying if a PC tries once and fails (when you're using a DC), then they cannot try again. I would disagree with that sentiment. If that was not your intent, then I apologise; I don't disagree with you at all.
            $endgroup$
            – Jim Cullen
            May 27 at 23:05
















          13












          $begingroup$

          Both are appropriate for different circumstances



          The description of how the player wishes to open the door is key. Typically if they wish to 'Smash down a door' - i.e. break it off of it's hinges, a strength check would be the appropriate choice, with a DC determined by the DM according to the description of the door.



          If the PC wishes to directly attack and damage the door itself, then AC should be used to determine if they're capable of dealing sufficient damage.



          One caveat of letting a PC use AC to attack a door however, is that they'd eventually be able to break even the strongest of doors with enough attacks. If you don't wish the door to be eventually broken into by anybody - a strength check is a single determination of whether a PC is capable of it or not.






          share|improve this answer









          $endgroup$











          • 11




            $begingroup$
            Addressing your last paragraph, page 247 of the DMG refers to a “damage threshold” which means that an object is immune to all damage unless it exceeds a certain amount from a single attack, in which case it takes damage normally. This means the door could be more resistant to damage than you may think.
            $endgroup$
            – Liam Morris
            May 24 at 11:40








          • 1




            $begingroup$
            @LiamMorris iirc the Damage threshold rule is written as optional unless the object is Large? But nonetheless yeah I agree - that is a good way around it. The main point still applies though that one is forcing the door open through normal function, and the other is destroying it regardless of function.
            $endgroup$
            – Whambulance
            May 24 at 11:52






          • 2




            $begingroup$
            Perhaps worth noting: some published adventures explicitly call out that a properly fortified door cannot be kicked in with a Strength Check, and must instead be destroyed by attacking it. The most recent example being in Ghosts of Saltmarsh. dndbeyond.com/sources/gos/tammerauts-fate#ReinforcingtheDoors
            $endgroup$
            – guildsbounty
            May 24 at 13:03










          • $begingroup$
            I'm not sure I agree with that last paragraph entirely. Unless you have set the DC so high the PC cannot succeed even on a 20, one failure could just lead to more attempts. So the consequences of failure are similar. PCs might get caught by guards or alert whatever is behind the door, etc. Only difference is one case can lead to progressively getting closer, the other is a series of binary success/failure attempts.
            $endgroup$
            – Jim Cullen
            May 27 at 3:43






          • 1




            $begingroup$
            My interpretation of that part of your answer was that you were implying if a PC tries once and fails (when you're using a DC), then they cannot try again. I would disagree with that sentiment. If that was not your intent, then I apologise; I don't disagree with you at all.
            $endgroup$
            – Jim Cullen
            May 27 at 23:05














          13












          13








          13





          $begingroup$

          Both are appropriate for different circumstances



          The description of how the player wishes to open the door is key. Typically if they wish to 'Smash down a door' - i.e. break it off of it's hinges, a strength check would be the appropriate choice, with a DC determined by the DM according to the description of the door.



          If the PC wishes to directly attack and damage the door itself, then AC should be used to determine if they're capable of dealing sufficient damage.



          One caveat of letting a PC use AC to attack a door however, is that they'd eventually be able to break even the strongest of doors with enough attacks. If you don't wish the door to be eventually broken into by anybody - a strength check is a single determination of whether a PC is capable of it or not.






          share|improve this answer









          $endgroup$



          Both are appropriate for different circumstances



          The description of how the player wishes to open the door is key. Typically if they wish to 'Smash down a door' - i.e. break it off of it's hinges, a strength check would be the appropriate choice, with a DC determined by the DM according to the description of the door.



          If the PC wishes to directly attack and damage the door itself, then AC should be used to determine if they're capable of dealing sufficient damage.



          One caveat of letting a PC use AC to attack a door however, is that they'd eventually be able to break even the strongest of doors with enough attacks. If you don't wish the door to be eventually broken into by anybody - a strength check is a single determination of whether a PC is capable of it or not.







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered May 24 at 11:34









          WhambulanceWhambulance

          1,0331 gold badge3 silver badges15 bronze badges




          1,0331 gold badge3 silver badges15 bronze badges











          • 11




            $begingroup$
            Addressing your last paragraph, page 247 of the DMG refers to a “damage threshold” which means that an object is immune to all damage unless it exceeds a certain amount from a single attack, in which case it takes damage normally. This means the door could be more resistant to damage than you may think.
            $endgroup$
            – Liam Morris
            May 24 at 11:40








          • 1




            $begingroup$
            @LiamMorris iirc the Damage threshold rule is written as optional unless the object is Large? But nonetheless yeah I agree - that is a good way around it. The main point still applies though that one is forcing the door open through normal function, and the other is destroying it regardless of function.
            $endgroup$
            – Whambulance
            May 24 at 11:52






          • 2




            $begingroup$
            Perhaps worth noting: some published adventures explicitly call out that a properly fortified door cannot be kicked in with a Strength Check, and must instead be destroyed by attacking it. The most recent example being in Ghosts of Saltmarsh. dndbeyond.com/sources/gos/tammerauts-fate#ReinforcingtheDoors
            $endgroup$
            – guildsbounty
            May 24 at 13:03










          • $begingroup$
            I'm not sure I agree with that last paragraph entirely. Unless you have set the DC so high the PC cannot succeed even on a 20, one failure could just lead to more attempts. So the consequences of failure are similar. PCs might get caught by guards or alert whatever is behind the door, etc. Only difference is one case can lead to progressively getting closer, the other is a series of binary success/failure attempts.
            $endgroup$
            – Jim Cullen
            May 27 at 3:43






          • 1




            $begingroup$
            My interpretation of that part of your answer was that you were implying if a PC tries once and fails (when you're using a DC), then they cannot try again. I would disagree with that sentiment. If that was not your intent, then I apologise; I don't disagree with you at all.
            $endgroup$
            – Jim Cullen
            May 27 at 23:05














          • 11




            $begingroup$
            Addressing your last paragraph, page 247 of the DMG refers to a “damage threshold” which means that an object is immune to all damage unless it exceeds a certain amount from a single attack, in which case it takes damage normally. This means the door could be more resistant to damage than you may think.
            $endgroup$
            – Liam Morris
            May 24 at 11:40








          • 1




            $begingroup$
            @LiamMorris iirc the Damage threshold rule is written as optional unless the object is Large? But nonetheless yeah I agree - that is a good way around it. The main point still applies though that one is forcing the door open through normal function, and the other is destroying it regardless of function.
            $endgroup$
            – Whambulance
            May 24 at 11:52






          • 2




            $begingroup$
            Perhaps worth noting: some published adventures explicitly call out that a properly fortified door cannot be kicked in with a Strength Check, and must instead be destroyed by attacking it. The most recent example being in Ghosts of Saltmarsh. dndbeyond.com/sources/gos/tammerauts-fate#ReinforcingtheDoors
            $endgroup$
            – guildsbounty
            May 24 at 13:03










          • $begingroup$
            I'm not sure I agree with that last paragraph entirely. Unless you have set the DC so high the PC cannot succeed even on a 20, one failure could just lead to more attempts. So the consequences of failure are similar. PCs might get caught by guards or alert whatever is behind the door, etc. Only difference is one case can lead to progressively getting closer, the other is a series of binary success/failure attempts.
            $endgroup$
            – Jim Cullen
            May 27 at 3:43






          • 1




            $begingroup$
            My interpretation of that part of your answer was that you were implying if a PC tries once and fails (when you're using a DC), then they cannot try again. I would disagree with that sentiment. If that was not your intent, then I apologise; I don't disagree with you at all.
            $endgroup$
            – Jim Cullen
            May 27 at 23:05








          11




          11




          $begingroup$
          Addressing your last paragraph, page 247 of the DMG refers to a “damage threshold” which means that an object is immune to all damage unless it exceeds a certain amount from a single attack, in which case it takes damage normally. This means the door could be more resistant to damage than you may think.
          $endgroup$
          – Liam Morris
          May 24 at 11:40






          $begingroup$
          Addressing your last paragraph, page 247 of the DMG refers to a “damage threshold” which means that an object is immune to all damage unless it exceeds a certain amount from a single attack, in which case it takes damage normally. This means the door could be more resistant to damage than you may think.
          $endgroup$
          – Liam Morris
          May 24 at 11:40






          1




          1




          $begingroup$
          @LiamMorris iirc the Damage threshold rule is written as optional unless the object is Large? But nonetheless yeah I agree - that is a good way around it. The main point still applies though that one is forcing the door open through normal function, and the other is destroying it regardless of function.
          $endgroup$
          – Whambulance
          May 24 at 11:52




          $begingroup$
          @LiamMorris iirc the Damage threshold rule is written as optional unless the object is Large? But nonetheless yeah I agree - that is a good way around it. The main point still applies though that one is forcing the door open through normal function, and the other is destroying it regardless of function.
          $endgroup$
          – Whambulance
          May 24 at 11:52




          2




          2




          $begingroup$
          Perhaps worth noting: some published adventures explicitly call out that a properly fortified door cannot be kicked in with a Strength Check, and must instead be destroyed by attacking it. The most recent example being in Ghosts of Saltmarsh. dndbeyond.com/sources/gos/tammerauts-fate#ReinforcingtheDoors
          $endgroup$
          – guildsbounty
          May 24 at 13:03




          $begingroup$
          Perhaps worth noting: some published adventures explicitly call out that a properly fortified door cannot be kicked in with a Strength Check, and must instead be destroyed by attacking it. The most recent example being in Ghosts of Saltmarsh. dndbeyond.com/sources/gos/tammerauts-fate#ReinforcingtheDoors
          $endgroup$
          – guildsbounty
          May 24 at 13:03












          $begingroup$
          I'm not sure I agree with that last paragraph entirely. Unless you have set the DC so high the PC cannot succeed even on a 20, one failure could just lead to more attempts. So the consequences of failure are similar. PCs might get caught by guards or alert whatever is behind the door, etc. Only difference is one case can lead to progressively getting closer, the other is a series of binary success/failure attempts.
          $endgroup$
          – Jim Cullen
          May 27 at 3:43




          $begingroup$
          I'm not sure I agree with that last paragraph entirely. Unless you have set the DC so high the PC cannot succeed even on a 20, one failure could just lead to more attempts. So the consequences of failure are similar. PCs might get caught by guards or alert whatever is behind the door, etc. Only difference is one case can lead to progressively getting closer, the other is a series of binary success/failure attempts.
          $endgroup$
          – Jim Cullen
          May 27 at 3:43




          1




          1




          $begingroup$
          My interpretation of that part of your answer was that you were implying if a PC tries once and fails (when you're using a DC), then they cannot try again. I would disagree with that sentiment. If that was not your intent, then I apologise; I don't disagree with you at all.
          $endgroup$
          – Jim Cullen
          May 27 at 23:05




          $begingroup$
          My interpretation of that part of your answer was that you were implying if a PC tries once and fails (when you're using a DC), then they cannot try again. I would disagree with that sentiment. If that was not your intent, then I apologise; I don't disagree with you at all.
          $endgroup$
          – Jim Cullen
          May 27 at 23:05











          12












          $begingroup$

          It depends on the Situation



          Is there a penalty for failure, and how detailed do we really need to be?



          Scenario 1



          If your party is in the middle of a combat and needs to break through a door, then how long it takes them matters just as much as how hard they hit. There is definitely a penalty for failure here, and as it is combat, and thus a tense situation where every action matters, we want to be detailed. Thus, use AC and hit points.



          Scenario 2



          If your party is not threatened, has plenty of time, and there is no penalty for failure, you don't even need to roll. Look at the proposed DC, look at the characters and how they intend to do it and make a judgement call. If they have any chance of success, they'll get there eventually so just narrate it happening. If there is no chance of them achieving it, perhaps because they're all Strength 8 wizards with just their fists against a locked iron door, then you just tell them they have no chance.



          Scenario 3



          But what if there is a penalty for failure? Maybe there's some unsuspecting monsters on the other side, who could be taken by surprise if you successfully kick the door down on the first attempt, but will be able to react if it takes longer. We could make attacks against the door until it breaks, and decide that if the players do not break the door in X turns then the monsters will have had time to prepare a defence. But in practice, all this will turn into is a bunch of meaningless dice throws. Nothing has changed from the players' point of view, so they're just going to keep hitting the door again, and again, and again, until the door breaks. That is a boring waste of precious table time.



          So instead, roll against the DC. If your players make the roll, they did it quickly enough that the monsters are still napping, playing cards or whatever. If they fail, they had to hit the thing enough times that the monsters were able to ready a defence.



          In conclusion



          Don't roll the dice any more than you need to. If there is no penalty for failure and a chance to succeed, give it to them. If the failure doesn't get any worse if they repeatedly fail, just roll once against the DC. If it really does matter exactly how long it takes to break the door, and you really need to know exactly how many hits it will take then, and only then, use AC and hit points.



          A caveat is if your players want to give the door an opportunistic kick, just to see if it'll open, without investing all the time necessary to guarantee that the door breaks. In this case, roll the DC once. If they make it, great! If they don't then anyone on the other side knows they are there, so you don't need to bother rolling again.






          share|improve this answer











          $endgroup$




















            12












            $begingroup$

            It depends on the Situation



            Is there a penalty for failure, and how detailed do we really need to be?



            Scenario 1



            If your party is in the middle of a combat and needs to break through a door, then how long it takes them matters just as much as how hard they hit. There is definitely a penalty for failure here, and as it is combat, and thus a tense situation where every action matters, we want to be detailed. Thus, use AC and hit points.



            Scenario 2



            If your party is not threatened, has plenty of time, and there is no penalty for failure, you don't even need to roll. Look at the proposed DC, look at the characters and how they intend to do it and make a judgement call. If they have any chance of success, they'll get there eventually so just narrate it happening. If there is no chance of them achieving it, perhaps because they're all Strength 8 wizards with just their fists against a locked iron door, then you just tell them they have no chance.



            Scenario 3



            But what if there is a penalty for failure? Maybe there's some unsuspecting monsters on the other side, who could be taken by surprise if you successfully kick the door down on the first attempt, but will be able to react if it takes longer. We could make attacks against the door until it breaks, and decide that if the players do not break the door in X turns then the monsters will have had time to prepare a defence. But in practice, all this will turn into is a bunch of meaningless dice throws. Nothing has changed from the players' point of view, so they're just going to keep hitting the door again, and again, and again, until the door breaks. That is a boring waste of precious table time.



            So instead, roll against the DC. If your players make the roll, they did it quickly enough that the monsters are still napping, playing cards or whatever. If they fail, they had to hit the thing enough times that the monsters were able to ready a defence.



            In conclusion



            Don't roll the dice any more than you need to. If there is no penalty for failure and a chance to succeed, give it to them. If the failure doesn't get any worse if they repeatedly fail, just roll once against the DC. If it really does matter exactly how long it takes to break the door, and you really need to know exactly how many hits it will take then, and only then, use AC and hit points.



            A caveat is if your players want to give the door an opportunistic kick, just to see if it'll open, without investing all the time necessary to guarantee that the door breaks. In this case, roll the DC once. If they make it, great! If they don't then anyone on the other side knows they are there, so you don't need to bother rolling again.






            share|improve this answer











            $endgroup$


















              12












              12








              12





              $begingroup$

              It depends on the Situation



              Is there a penalty for failure, and how detailed do we really need to be?



              Scenario 1



              If your party is in the middle of a combat and needs to break through a door, then how long it takes them matters just as much as how hard they hit. There is definitely a penalty for failure here, and as it is combat, and thus a tense situation where every action matters, we want to be detailed. Thus, use AC and hit points.



              Scenario 2



              If your party is not threatened, has plenty of time, and there is no penalty for failure, you don't even need to roll. Look at the proposed DC, look at the characters and how they intend to do it and make a judgement call. If they have any chance of success, they'll get there eventually so just narrate it happening. If there is no chance of them achieving it, perhaps because they're all Strength 8 wizards with just their fists against a locked iron door, then you just tell them they have no chance.



              Scenario 3



              But what if there is a penalty for failure? Maybe there's some unsuspecting monsters on the other side, who could be taken by surprise if you successfully kick the door down on the first attempt, but will be able to react if it takes longer. We could make attacks against the door until it breaks, and decide that if the players do not break the door in X turns then the monsters will have had time to prepare a defence. But in practice, all this will turn into is a bunch of meaningless dice throws. Nothing has changed from the players' point of view, so they're just going to keep hitting the door again, and again, and again, until the door breaks. That is a boring waste of precious table time.



              So instead, roll against the DC. If your players make the roll, they did it quickly enough that the monsters are still napping, playing cards or whatever. If they fail, they had to hit the thing enough times that the monsters were able to ready a defence.



              In conclusion



              Don't roll the dice any more than you need to. If there is no penalty for failure and a chance to succeed, give it to them. If the failure doesn't get any worse if they repeatedly fail, just roll once against the DC. If it really does matter exactly how long it takes to break the door, and you really need to know exactly how many hits it will take then, and only then, use AC and hit points.



              A caveat is if your players want to give the door an opportunistic kick, just to see if it'll open, without investing all the time necessary to guarantee that the door breaks. In this case, roll the DC once. If they make it, great! If they don't then anyone on the other side knows they are there, so you don't need to bother rolling again.






              share|improve this answer











              $endgroup$



              It depends on the Situation



              Is there a penalty for failure, and how detailed do we really need to be?



              Scenario 1



              If your party is in the middle of a combat and needs to break through a door, then how long it takes them matters just as much as how hard they hit. There is definitely a penalty for failure here, and as it is combat, and thus a tense situation where every action matters, we want to be detailed. Thus, use AC and hit points.



              Scenario 2



              If your party is not threatened, has plenty of time, and there is no penalty for failure, you don't even need to roll. Look at the proposed DC, look at the characters and how they intend to do it and make a judgement call. If they have any chance of success, they'll get there eventually so just narrate it happening. If there is no chance of them achieving it, perhaps because they're all Strength 8 wizards with just their fists against a locked iron door, then you just tell them they have no chance.



              Scenario 3



              But what if there is a penalty for failure? Maybe there's some unsuspecting monsters on the other side, who could be taken by surprise if you successfully kick the door down on the first attempt, but will be able to react if it takes longer. We could make attacks against the door until it breaks, and decide that if the players do not break the door in X turns then the monsters will have had time to prepare a defence. But in practice, all this will turn into is a bunch of meaningless dice throws. Nothing has changed from the players' point of view, so they're just going to keep hitting the door again, and again, and again, until the door breaks. That is a boring waste of precious table time.



              So instead, roll against the DC. If your players make the roll, they did it quickly enough that the monsters are still napping, playing cards or whatever. If they fail, they had to hit the thing enough times that the monsters were able to ready a defence.



              In conclusion



              Don't roll the dice any more than you need to. If there is no penalty for failure and a chance to succeed, give it to them. If the failure doesn't get any worse if they repeatedly fail, just roll once against the DC. If it really does matter exactly how long it takes to break the door, and you really need to know exactly how many hits it will take then, and only then, use AC and hit points.



              A caveat is if your players want to give the door an opportunistic kick, just to see if it'll open, without investing all the time necessary to guarantee that the door breaks. In this case, roll the DC once. If they make it, great! If they don't then anyone on the other side knows they are there, so you don't need to bother rolling again.







              share|improve this answer














              share|improve this answer



              share|improve this answer








              edited May 25 at 9:36









              V2Blast♦

              33.4k5 gold badges121 silver badges208 bronze badges




              33.4k5 gold badges121 silver badges208 bronze badges










              answered May 24 at 11:40









              KyyshakKyyshak

              1,7306 silver badges18 bronze badges




              1,7306 silver badges18 bronze badges


























                  3












                  $begingroup$

                  They both solve the same problem



                  Both DC and AC handle the same situation, they just have different ways of handling it. There is no right or wrong choice in which to do. The choice should be made considering what feels right for the encounter, what the DM/players prefer, and the skill set of the party involved.



                  When to use DC



                  DC tends to be the simpler solution. Typically breaking down a door requires one roll per attempt and without HP there are less numbers to keep track of. This makes the encounters more streamlined and feel fluid. I have found that using DC tends to be more cinematic and players who enjoy the role-play prefer this option.



                  Against stronger doors you could even create a situation with sequential DCs they need to beat to break it down. For example, an iron door would be much harder to break down by brute force, but that won't stop the barbarian from trying! Set the door with 3 DCs to beat. I opt for starting with a high DC then lowering the following checks as the door takes mores damage. The first cause the door to bulge, the second breaks the hinges and bends the door, the third rips the door off the hinges and sends it flying into the room.



                  When to use AC



                  AC has more factors to consider. Treating a door as an object you have to consider its HP, its AC, and any damage reductions it may have. It also helps when your party overall has a low strength save and beating strength DCs is difficult and takes multiple attempts. This also enables casters and non-melee characters to help break down the door. Players who enjoy number crunching or parties with low strength checks would likely prefer this solution.



                  When you have stronger doors and it is unrealistic to break them down with brute strength, it's more appropriated to stat the wall with AC/HP. Giving a door more HP, a higher AC, or modifying its damage reduction is an easy way to increase their difficulty.



                  Also I've ran sessions with people who hold grudges against doors and watching the HP of a door whittle down until it eventually breaks gives them an odd sense of satisfaction.




                  This answer is based on encounters in sessions I have ran or played in. My opinion based on my personal experiences and are by no means a large study. There are times when I use both methods, but my preference is to use DC.






                  share|improve this answer









                  $endgroup$




















                    3












                    $begingroup$

                    They both solve the same problem



                    Both DC and AC handle the same situation, they just have different ways of handling it. There is no right or wrong choice in which to do. The choice should be made considering what feels right for the encounter, what the DM/players prefer, and the skill set of the party involved.



                    When to use DC



                    DC tends to be the simpler solution. Typically breaking down a door requires one roll per attempt and without HP there are less numbers to keep track of. This makes the encounters more streamlined and feel fluid. I have found that using DC tends to be more cinematic and players who enjoy the role-play prefer this option.



                    Against stronger doors you could even create a situation with sequential DCs they need to beat to break it down. For example, an iron door would be much harder to break down by brute force, but that won't stop the barbarian from trying! Set the door with 3 DCs to beat. I opt for starting with a high DC then lowering the following checks as the door takes mores damage. The first cause the door to bulge, the second breaks the hinges and bends the door, the third rips the door off the hinges and sends it flying into the room.



                    When to use AC



                    AC has more factors to consider. Treating a door as an object you have to consider its HP, its AC, and any damage reductions it may have. It also helps when your party overall has a low strength save and beating strength DCs is difficult and takes multiple attempts. This also enables casters and non-melee characters to help break down the door. Players who enjoy number crunching or parties with low strength checks would likely prefer this solution.



                    When you have stronger doors and it is unrealistic to break them down with brute strength, it's more appropriated to stat the wall with AC/HP. Giving a door more HP, a higher AC, or modifying its damage reduction is an easy way to increase their difficulty.



                    Also I've ran sessions with people who hold grudges against doors and watching the HP of a door whittle down until it eventually breaks gives them an odd sense of satisfaction.




                    This answer is based on encounters in sessions I have ran or played in. My opinion based on my personal experiences and are by no means a large study. There are times when I use both methods, but my preference is to use DC.






                    share|improve this answer









                    $endgroup$


















                      3












                      3








                      3





                      $begingroup$

                      They both solve the same problem



                      Both DC and AC handle the same situation, they just have different ways of handling it. There is no right or wrong choice in which to do. The choice should be made considering what feels right for the encounter, what the DM/players prefer, and the skill set of the party involved.



                      When to use DC



                      DC tends to be the simpler solution. Typically breaking down a door requires one roll per attempt and without HP there are less numbers to keep track of. This makes the encounters more streamlined and feel fluid. I have found that using DC tends to be more cinematic and players who enjoy the role-play prefer this option.



                      Against stronger doors you could even create a situation with sequential DCs they need to beat to break it down. For example, an iron door would be much harder to break down by brute force, but that won't stop the barbarian from trying! Set the door with 3 DCs to beat. I opt for starting with a high DC then lowering the following checks as the door takes mores damage. The first cause the door to bulge, the second breaks the hinges and bends the door, the third rips the door off the hinges and sends it flying into the room.



                      When to use AC



                      AC has more factors to consider. Treating a door as an object you have to consider its HP, its AC, and any damage reductions it may have. It also helps when your party overall has a low strength save and beating strength DCs is difficult and takes multiple attempts. This also enables casters and non-melee characters to help break down the door. Players who enjoy number crunching or parties with low strength checks would likely prefer this solution.



                      When you have stronger doors and it is unrealistic to break them down with brute strength, it's more appropriated to stat the wall with AC/HP. Giving a door more HP, a higher AC, or modifying its damage reduction is an easy way to increase their difficulty.



                      Also I've ran sessions with people who hold grudges against doors and watching the HP of a door whittle down until it eventually breaks gives them an odd sense of satisfaction.




                      This answer is based on encounters in sessions I have ran or played in. My opinion based on my personal experiences and are by no means a large study. There are times when I use both methods, but my preference is to use DC.






                      share|improve this answer









                      $endgroup$



                      They both solve the same problem



                      Both DC and AC handle the same situation, they just have different ways of handling it. There is no right or wrong choice in which to do. The choice should be made considering what feels right for the encounter, what the DM/players prefer, and the skill set of the party involved.



                      When to use DC



                      DC tends to be the simpler solution. Typically breaking down a door requires one roll per attempt and without HP there are less numbers to keep track of. This makes the encounters more streamlined and feel fluid. I have found that using DC tends to be more cinematic and players who enjoy the role-play prefer this option.



                      Against stronger doors you could even create a situation with sequential DCs they need to beat to break it down. For example, an iron door would be much harder to break down by brute force, but that won't stop the barbarian from trying! Set the door with 3 DCs to beat. I opt for starting with a high DC then lowering the following checks as the door takes mores damage. The first cause the door to bulge, the second breaks the hinges and bends the door, the third rips the door off the hinges and sends it flying into the room.



                      When to use AC



                      AC has more factors to consider. Treating a door as an object you have to consider its HP, its AC, and any damage reductions it may have. It also helps when your party overall has a low strength save and beating strength DCs is difficult and takes multiple attempts. This also enables casters and non-melee characters to help break down the door. Players who enjoy number crunching or parties with low strength checks would likely prefer this solution.



                      When you have stronger doors and it is unrealistic to break them down with brute strength, it's more appropriated to stat the wall with AC/HP. Giving a door more HP, a higher AC, or modifying its damage reduction is an easy way to increase their difficulty.



                      Also I've ran sessions with people who hold grudges against doors and watching the HP of a door whittle down until it eventually breaks gives them an odd sense of satisfaction.




                      This answer is based on encounters in sessions I have ran or played in. My opinion based on my personal experiences and are by no means a large study. There are times when I use both methods, but my preference is to use DC.







                      share|improve this answer












                      share|improve this answer



                      share|improve this answer










                      answered May 24 at 14:18









                      Balefire LiegeBalefire Liege

                      4191 silver badge17 bronze badges




                      4191 silver badge17 bronze badges


























                          2












                          $begingroup$

                          I always change it based on what the door is made of and what the players is doing.



                          If the player says they are going to shoulder check the door that is obviously a strength check if they say they are going to use an axe to chop through the door that is attacking the door. I never let my players just say "I am going to try to break the door down" my immediate response is "How? How are you trying to break it"



                          But I limit what the players can do (or at least what works, hey you can try anything) based on the door material. You are not chopping through an iron door no matter how many times you hit it with the axe, the object damage rules support this with something called a damage threshold and damage immunities. For instance I always rule slashing don't work on stone or at least not unless you are doing at least 30 points of damage with each attack, so generally a strength checks are all that is possible. A stone door might be possible to break with a hammer or heavy pick but almost no other weapon is going to leave a mark but a strength check is always possible even if impossibly high. this mechanic is great for mitigating what I call tomfoolery, like players attempting to cut a rope with a sling or club or trying to smash down a wooden door with a rapier.



                          A homebrew thing I sometimes do is say every attack does 1 point of damage to the weapon or 1d2-1 if it is an very sturdy weapon, this keeps players from just always relying on breaking things down, now they might destroy their weapon if they get unlikely with their rolls to chop through the door. Usually I save this for sturdy objects like metal or stone, but wood might be appropriate if the players are trying to dig their way through a iron bound wooden door with a sword or a low level monk tries to punch their way though an solid oak door. It makes the layers stop and think which is always a plus.






                          share|improve this answer









                          $endgroup$




















                            2












                            $begingroup$

                            I always change it based on what the door is made of and what the players is doing.



                            If the player says they are going to shoulder check the door that is obviously a strength check if they say they are going to use an axe to chop through the door that is attacking the door. I never let my players just say "I am going to try to break the door down" my immediate response is "How? How are you trying to break it"



                            But I limit what the players can do (or at least what works, hey you can try anything) based on the door material. You are not chopping through an iron door no matter how many times you hit it with the axe, the object damage rules support this with something called a damage threshold and damage immunities. For instance I always rule slashing don't work on stone or at least not unless you are doing at least 30 points of damage with each attack, so generally a strength checks are all that is possible. A stone door might be possible to break with a hammer or heavy pick but almost no other weapon is going to leave a mark but a strength check is always possible even if impossibly high. this mechanic is great for mitigating what I call tomfoolery, like players attempting to cut a rope with a sling or club or trying to smash down a wooden door with a rapier.



                            A homebrew thing I sometimes do is say every attack does 1 point of damage to the weapon or 1d2-1 if it is an very sturdy weapon, this keeps players from just always relying on breaking things down, now they might destroy their weapon if they get unlikely with their rolls to chop through the door. Usually I save this for sturdy objects like metal or stone, but wood might be appropriate if the players are trying to dig their way through a iron bound wooden door with a sword or a low level monk tries to punch their way though an solid oak door. It makes the layers stop and think which is always a plus.






                            share|improve this answer









                            $endgroup$


















                              2












                              2








                              2





                              $begingroup$

                              I always change it based on what the door is made of and what the players is doing.



                              If the player says they are going to shoulder check the door that is obviously a strength check if they say they are going to use an axe to chop through the door that is attacking the door. I never let my players just say "I am going to try to break the door down" my immediate response is "How? How are you trying to break it"



                              But I limit what the players can do (or at least what works, hey you can try anything) based on the door material. You are not chopping through an iron door no matter how many times you hit it with the axe, the object damage rules support this with something called a damage threshold and damage immunities. For instance I always rule slashing don't work on stone or at least not unless you are doing at least 30 points of damage with each attack, so generally a strength checks are all that is possible. A stone door might be possible to break with a hammer or heavy pick but almost no other weapon is going to leave a mark but a strength check is always possible even if impossibly high. this mechanic is great for mitigating what I call tomfoolery, like players attempting to cut a rope with a sling or club or trying to smash down a wooden door with a rapier.



                              A homebrew thing I sometimes do is say every attack does 1 point of damage to the weapon or 1d2-1 if it is an very sturdy weapon, this keeps players from just always relying on breaking things down, now they might destroy their weapon if they get unlikely with their rolls to chop through the door. Usually I save this for sturdy objects like metal or stone, but wood might be appropriate if the players are trying to dig their way through a iron bound wooden door with a sword or a low level monk tries to punch their way though an solid oak door. It makes the layers stop and think which is always a plus.






                              share|improve this answer









                              $endgroup$



                              I always change it based on what the door is made of and what the players is doing.



                              If the player says they are going to shoulder check the door that is obviously a strength check if they say they are going to use an axe to chop through the door that is attacking the door. I never let my players just say "I am going to try to break the door down" my immediate response is "How? How are you trying to break it"



                              But I limit what the players can do (or at least what works, hey you can try anything) based on the door material. You are not chopping through an iron door no matter how many times you hit it with the axe, the object damage rules support this with something called a damage threshold and damage immunities. For instance I always rule slashing don't work on stone or at least not unless you are doing at least 30 points of damage with each attack, so generally a strength checks are all that is possible. A stone door might be possible to break with a hammer or heavy pick but almost no other weapon is going to leave a mark but a strength check is always possible even if impossibly high. this mechanic is great for mitigating what I call tomfoolery, like players attempting to cut a rope with a sling or club or trying to smash down a wooden door with a rapier.



                              A homebrew thing I sometimes do is say every attack does 1 point of damage to the weapon or 1d2-1 if it is an very sturdy weapon, this keeps players from just always relying on breaking things down, now they might destroy their weapon if they get unlikely with their rolls to chop through the door. Usually I save this for sturdy objects like metal or stone, but wood might be appropriate if the players are trying to dig their way through a iron bound wooden door with a sword or a low level monk tries to punch their way though an solid oak door. It makes the layers stop and think which is always a plus.







                              share|improve this answer












                              share|improve this answer



                              share|improve this answer










                              answered May 24 at 14:14









                              JohnJohn

                              4,2792 gold badges8 silver badges24 bronze badges




                              4,2792 gold badges8 silver badges24 bronze badges


























                                  1












                                  $begingroup$

                                  In Moments of Building Tension



                                  Whilst it may be better to abstract the damage as User Kyyshack said in a comment:




                                  If they roll an attack, what will players do if they don't get through in the first hit? Nothing has really changed so they'll just hit the door again. And Again. And Again. Until the door is broken. That's super boring and wastes time. It's much better to abstract that boring time away behind a single roll against a DC that will answer your question of "Do they break through quickly enough to catch the monsters off guard?"




                                  Using the rules for Object AC and Hit Points could be useful to help build tension. Rather than having the PC’s roll over and over again, you could have monsters roll to see if they damage a door the PC’s are on the other side of. Seeing creatures claw through a door or ripping boards off it would create more tension than if they rolled a nat 20 and broke it down in a single turn. The former option might allow players more time to react to the issue and respond to it, such as by barricading the door, escaping, preparing an ambush, etc.



                                  Additionally, having rickety old damaged doors or furniture can help to establish a theme. If players find a door that has already been damaged, they may want to investigate what caused it, and if that thing is still around. For example, if they found a door with a large axe wound in the middle of it like something out The Shining, players may wonder who was trying to get into this room, and why? Or, if they stumbled upon a door with a dozen puncture wounds in it like it was repeatedly stabbed by a dagger, they may investigate the cause - or not, but they’ll learn pretty quickly what caused those holes when they get hit in the back of the head by a falling flail trap.



                                  Partial Opening



                                  Thanks to user Jared Posch for highlighting the idea of accessibility in their comment:




                                  I would look at the accessibility of the lock, aka, can the players actually attack the lock. A door locked with a wooden beam would mean the beam is behind the door, so unless a player can accurately swing his sword down the middle, I'd say they don't do damage




                                  Rather than players having to completely open a door (such as by destroying it completely or by bashing through the door with a DC Strength check), players might partially damage a door.




                                  • For example, players might cut a hole around the locking mechanism to open a door, leaving it damaged but mostly intact - perhaps only removing 1 or 2 HP from the door.


                                  • Or, players may cut a hole in the door, creating an opening large enough for a Small creature to go through (or a Medium sized creature if they squeeze through the hole). This could be useful if they know they are being chased by Large creatures as it would slow them down. Alternatively, Small creatures like Kobolds might make holes in locked doors as it would slow down Medium sized creatures, hinger Large creatures but would not affect Small creatures like themselves (or they could make Tiny holes so they could squeeze through but larger creatures wouldn’t be able to).


                                  • Players may even put a hole in the door to gain access to the lock or door bar on the other side, allowing the door to be easily unlocked.



                                  Treat the door as though it was made up of smaller objects. So, whilst you may need to remove 18 HP to destroy a Medium sized resilient door completely, you may only take off 5 HP to put a Tiny hole in it or 10 to put a Small hole in it.



                                  Reinforced Doors



                                  User guildsbounty helpfully pointed out:




                                  Perhaps worth noting: some published adventures explicitly call out that a properly fortified door cannot be kicked in with a Strength Check, and must instead be destroyed by attacking it. The most recent example being in Ghosts of Saltmarsh.




                                  Having this clear distinction for Reinforced doors could be quite a useful tool. It may force players to make a decision between completely breaking this door, which would be very noisy and may take a long while, or finding another way through it. Here is what the Ghosts of Saltmarsh says about reinforced doors, page 157:




                                  It takes a character 1 hour to gather the required materials and reinforce one door. The time is cut in half if another character helps.
                                  A reinforced door cannot be broken through with a Strength check, but must be battered down (AC 15, 30 hit points, immunity to poison and psychic damage)




                                  Note that this rule is assuming the door is made out of wood, is being reinforced with wooden planks and nails and these materials are readily available.



                                  A possible way to calculate the health of a reinforced door is to add the health of the reinforcing objects to it and use the highest AC. For example, a Medium Resilient wood door (AC 15, HP 20) is being reinforced with Small Resilient planks of wood (AC 15, HP 10). The highest AC is 15 so the door has an AC of 15, 20 HP plus 10 HP equals 30 HP, giving us AC 15, HP 30 for the reinforced door in question. If we were using steel bars to reinforce the door instead, as they have an AC of 19, we would instead have AC 19, HP 30 for the reinforced door.



                                  So then, one possible situation where you would use AC and HP over a DC check is when a door has been reinforced, either by the players or by the inhabitants of a dungeon.



                                  Hitting Creatures Behind Cover



                                  This follows up from the idea of partial opening. I got a bit carried away but this highlights how object AC could be used in a completely different way than how a DC check is used:



                                  A creature can use any suitably large object as cover from an attack. A creature gains bonuses to their AC and Dexterity saving throws depending on the level of cover. A creature in total cover gains the bonus of it not being able to be targeted directly.



                                  If, for the purposes of an attack, we treat the door as a creature, we can use the Cleave Through Creatures optional rule in the DMG page 272:




                                  When a melee attack reduces an undamaged creature to 0 hit points, any excess damage from that attack might carry over to another creature nearby. The attacker targets another creature within reach and, if the original attack roll can hit it, applies any remaining damage to it




                                  So, using the example of a door, its a Medium sized resilient object made of wood, so it has 15 AC and 18 HP. However, we are targeting a Tiny section of it, so the AC is 15 and the HP is only 5. The attacker rolls a 16 and deals 7 damage, this hits the Tiny section of the door and reduces it to 0 HP. As we are using the Cleave Through Creatures rule, the attacker still has 2 damage left over which can be used to hit a creature within range (such as one who was standing right behind the door).



                                  Because the weapon has now gone through the cover, the creature is no longer in cover for the purpose of this attack - just to be clear, any bonuses for cover (such as increased AC, better Dex Saving Throws or being untargetable) the creature had are being ignored by this attack.



                                  If the 16 rolled by the attacker earlier to hit the door is enough to hit the creature behind the door (without any bonuses from cover) they will take the remaining 2 damage. If the creature had an AC of 17 though they would manage to avoid any damage.



                                  This rule would make more sense when applied against a creature behind a fragile material, such as glass. (Due to glass only having an AC of 13 and being fragile, a Tiny section of that might only have 2 HP, meaning more damage is transferred to the target). It also makes sense thematically, Rules as Written would say standing behind a glass window or a curtain or even pulling the bedsheets over your head would count as cover, they might even count as Total cover, preventing the creature from being targetted. However, by using the Cleave Through Creatures rule in this way, we can make things more realistic “that window will not stop this arrow going through”, “those curtains or those bedsheets aren’t going to stop my sword from stabbing you”.






                                  share|improve this answer











                                  $endgroup$




















                                    1












                                    $begingroup$

                                    In Moments of Building Tension



                                    Whilst it may be better to abstract the damage as User Kyyshack said in a comment:




                                    If they roll an attack, what will players do if they don't get through in the first hit? Nothing has really changed so they'll just hit the door again. And Again. And Again. Until the door is broken. That's super boring and wastes time. It's much better to abstract that boring time away behind a single roll against a DC that will answer your question of "Do they break through quickly enough to catch the monsters off guard?"




                                    Using the rules for Object AC and Hit Points could be useful to help build tension. Rather than having the PC’s roll over and over again, you could have monsters roll to see if they damage a door the PC’s are on the other side of. Seeing creatures claw through a door or ripping boards off it would create more tension than if they rolled a nat 20 and broke it down in a single turn. The former option might allow players more time to react to the issue and respond to it, such as by barricading the door, escaping, preparing an ambush, etc.



                                    Additionally, having rickety old damaged doors or furniture can help to establish a theme. If players find a door that has already been damaged, they may want to investigate what caused it, and if that thing is still around. For example, if they found a door with a large axe wound in the middle of it like something out The Shining, players may wonder who was trying to get into this room, and why? Or, if they stumbled upon a door with a dozen puncture wounds in it like it was repeatedly stabbed by a dagger, they may investigate the cause - or not, but they’ll learn pretty quickly what caused those holes when they get hit in the back of the head by a falling flail trap.



                                    Partial Opening



                                    Thanks to user Jared Posch for highlighting the idea of accessibility in their comment:




                                    I would look at the accessibility of the lock, aka, can the players actually attack the lock. A door locked with a wooden beam would mean the beam is behind the door, so unless a player can accurately swing his sword down the middle, I'd say they don't do damage




                                    Rather than players having to completely open a door (such as by destroying it completely or by bashing through the door with a DC Strength check), players might partially damage a door.




                                    • For example, players might cut a hole around the locking mechanism to open a door, leaving it damaged but mostly intact - perhaps only removing 1 or 2 HP from the door.


                                    • Or, players may cut a hole in the door, creating an opening large enough for a Small creature to go through (or a Medium sized creature if they squeeze through the hole). This could be useful if they know they are being chased by Large creatures as it would slow them down. Alternatively, Small creatures like Kobolds might make holes in locked doors as it would slow down Medium sized creatures, hinger Large creatures but would not affect Small creatures like themselves (or they could make Tiny holes so they could squeeze through but larger creatures wouldn’t be able to).


                                    • Players may even put a hole in the door to gain access to the lock or door bar on the other side, allowing the door to be easily unlocked.



                                    Treat the door as though it was made up of smaller objects. So, whilst you may need to remove 18 HP to destroy a Medium sized resilient door completely, you may only take off 5 HP to put a Tiny hole in it or 10 to put a Small hole in it.



                                    Reinforced Doors



                                    User guildsbounty helpfully pointed out:




                                    Perhaps worth noting: some published adventures explicitly call out that a properly fortified door cannot be kicked in with a Strength Check, and must instead be destroyed by attacking it. The most recent example being in Ghosts of Saltmarsh.




                                    Having this clear distinction for Reinforced doors could be quite a useful tool. It may force players to make a decision between completely breaking this door, which would be very noisy and may take a long while, or finding another way through it. Here is what the Ghosts of Saltmarsh says about reinforced doors, page 157:




                                    It takes a character 1 hour to gather the required materials and reinforce one door. The time is cut in half if another character helps.
                                    A reinforced door cannot be broken through with a Strength check, but must be battered down (AC 15, 30 hit points, immunity to poison and psychic damage)




                                    Note that this rule is assuming the door is made out of wood, is being reinforced with wooden planks and nails and these materials are readily available.



                                    A possible way to calculate the health of a reinforced door is to add the health of the reinforcing objects to it and use the highest AC. For example, a Medium Resilient wood door (AC 15, HP 20) is being reinforced with Small Resilient planks of wood (AC 15, HP 10). The highest AC is 15 so the door has an AC of 15, 20 HP plus 10 HP equals 30 HP, giving us AC 15, HP 30 for the reinforced door in question. If we were using steel bars to reinforce the door instead, as they have an AC of 19, we would instead have AC 19, HP 30 for the reinforced door.



                                    So then, one possible situation where you would use AC and HP over a DC check is when a door has been reinforced, either by the players or by the inhabitants of a dungeon.



                                    Hitting Creatures Behind Cover



                                    This follows up from the idea of partial opening. I got a bit carried away but this highlights how object AC could be used in a completely different way than how a DC check is used:



                                    A creature can use any suitably large object as cover from an attack. A creature gains bonuses to their AC and Dexterity saving throws depending on the level of cover. A creature in total cover gains the bonus of it not being able to be targeted directly.



                                    If, for the purposes of an attack, we treat the door as a creature, we can use the Cleave Through Creatures optional rule in the DMG page 272:




                                    When a melee attack reduces an undamaged creature to 0 hit points, any excess damage from that attack might carry over to another creature nearby. The attacker targets another creature within reach and, if the original attack roll can hit it, applies any remaining damage to it




                                    So, using the example of a door, its a Medium sized resilient object made of wood, so it has 15 AC and 18 HP. However, we are targeting a Tiny section of it, so the AC is 15 and the HP is only 5. The attacker rolls a 16 and deals 7 damage, this hits the Tiny section of the door and reduces it to 0 HP. As we are using the Cleave Through Creatures rule, the attacker still has 2 damage left over which can be used to hit a creature within range (such as one who was standing right behind the door).



                                    Because the weapon has now gone through the cover, the creature is no longer in cover for the purpose of this attack - just to be clear, any bonuses for cover (such as increased AC, better Dex Saving Throws or being untargetable) the creature had are being ignored by this attack.



                                    If the 16 rolled by the attacker earlier to hit the door is enough to hit the creature behind the door (without any bonuses from cover) they will take the remaining 2 damage. If the creature had an AC of 17 though they would manage to avoid any damage.



                                    This rule would make more sense when applied against a creature behind a fragile material, such as glass. (Due to glass only having an AC of 13 and being fragile, a Tiny section of that might only have 2 HP, meaning more damage is transferred to the target). It also makes sense thematically, Rules as Written would say standing behind a glass window or a curtain or even pulling the bedsheets over your head would count as cover, they might even count as Total cover, preventing the creature from being targetted. However, by using the Cleave Through Creatures rule in this way, we can make things more realistic “that window will not stop this arrow going through”, “those curtains or those bedsheets aren’t going to stop my sword from stabbing you”.






                                    share|improve this answer











                                    $endgroup$


















                                      1












                                      1








                                      1





                                      $begingroup$

                                      In Moments of Building Tension



                                      Whilst it may be better to abstract the damage as User Kyyshack said in a comment:




                                      If they roll an attack, what will players do if they don't get through in the first hit? Nothing has really changed so they'll just hit the door again. And Again. And Again. Until the door is broken. That's super boring and wastes time. It's much better to abstract that boring time away behind a single roll against a DC that will answer your question of "Do they break through quickly enough to catch the monsters off guard?"




                                      Using the rules for Object AC and Hit Points could be useful to help build tension. Rather than having the PC’s roll over and over again, you could have monsters roll to see if they damage a door the PC’s are on the other side of. Seeing creatures claw through a door or ripping boards off it would create more tension than if they rolled a nat 20 and broke it down in a single turn. The former option might allow players more time to react to the issue and respond to it, such as by barricading the door, escaping, preparing an ambush, etc.



                                      Additionally, having rickety old damaged doors or furniture can help to establish a theme. If players find a door that has already been damaged, they may want to investigate what caused it, and if that thing is still around. For example, if they found a door with a large axe wound in the middle of it like something out The Shining, players may wonder who was trying to get into this room, and why? Or, if they stumbled upon a door with a dozen puncture wounds in it like it was repeatedly stabbed by a dagger, they may investigate the cause - or not, but they’ll learn pretty quickly what caused those holes when they get hit in the back of the head by a falling flail trap.



                                      Partial Opening



                                      Thanks to user Jared Posch for highlighting the idea of accessibility in their comment:




                                      I would look at the accessibility of the lock, aka, can the players actually attack the lock. A door locked with a wooden beam would mean the beam is behind the door, so unless a player can accurately swing his sword down the middle, I'd say they don't do damage




                                      Rather than players having to completely open a door (such as by destroying it completely or by bashing through the door with a DC Strength check), players might partially damage a door.




                                      • For example, players might cut a hole around the locking mechanism to open a door, leaving it damaged but mostly intact - perhaps only removing 1 or 2 HP from the door.


                                      • Or, players may cut a hole in the door, creating an opening large enough for a Small creature to go through (or a Medium sized creature if they squeeze through the hole). This could be useful if they know they are being chased by Large creatures as it would slow them down. Alternatively, Small creatures like Kobolds might make holes in locked doors as it would slow down Medium sized creatures, hinger Large creatures but would not affect Small creatures like themselves (or they could make Tiny holes so they could squeeze through but larger creatures wouldn’t be able to).


                                      • Players may even put a hole in the door to gain access to the lock or door bar on the other side, allowing the door to be easily unlocked.



                                      Treat the door as though it was made up of smaller objects. So, whilst you may need to remove 18 HP to destroy a Medium sized resilient door completely, you may only take off 5 HP to put a Tiny hole in it or 10 to put a Small hole in it.



                                      Reinforced Doors



                                      User guildsbounty helpfully pointed out:




                                      Perhaps worth noting: some published adventures explicitly call out that a properly fortified door cannot be kicked in with a Strength Check, and must instead be destroyed by attacking it. The most recent example being in Ghosts of Saltmarsh.




                                      Having this clear distinction for Reinforced doors could be quite a useful tool. It may force players to make a decision between completely breaking this door, which would be very noisy and may take a long while, or finding another way through it. Here is what the Ghosts of Saltmarsh says about reinforced doors, page 157:




                                      It takes a character 1 hour to gather the required materials and reinforce one door. The time is cut in half if another character helps.
                                      A reinforced door cannot be broken through with a Strength check, but must be battered down (AC 15, 30 hit points, immunity to poison and psychic damage)




                                      Note that this rule is assuming the door is made out of wood, is being reinforced with wooden planks and nails and these materials are readily available.



                                      A possible way to calculate the health of a reinforced door is to add the health of the reinforcing objects to it and use the highest AC. For example, a Medium Resilient wood door (AC 15, HP 20) is being reinforced with Small Resilient planks of wood (AC 15, HP 10). The highest AC is 15 so the door has an AC of 15, 20 HP plus 10 HP equals 30 HP, giving us AC 15, HP 30 for the reinforced door in question. If we were using steel bars to reinforce the door instead, as they have an AC of 19, we would instead have AC 19, HP 30 for the reinforced door.



                                      So then, one possible situation where you would use AC and HP over a DC check is when a door has been reinforced, either by the players or by the inhabitants of a dungeon.



                                      Hitting Creatures Behind Cover



                                      This follows up from the idea of partial opening. I got a bit carried away but this highlights how object AC could be used in a completely different way than how a DC check is used:



                                      A creature can use any suitably large object as cover from an attack. A creature gains bonuses to their AC and Dexterity saving throws depending on the level of cover. A creature in total cover gains the bonus of it not being able to be targeted directly.



                                      If, for the purposes of an attack, we treat the door as a creature, we can use the Cleave Through Creatures optional rule in the DMG page 272:




                                      When a melee attack reduces an undamaged creature to 0 hit points, any excess damage from that attack might carry over to another creature nearby. The attacker targets another creature within reach and, if the original attack roll can hit it, applies any remaining damage to it




                                      So, using the example of a door, its a Medium sized resilient object made of wood, so it has 15 AC and 18 HP. However, we are targeting a Tiny section of it, so the AC is 15 and the HP is only 5. The attacker rolls a 16 and deals 7 damage, this hits the Tiny section of the door and reduces it to 0 HP. As we are using the Cleave Through Creatures rule, the attacker still has 2 damage left over which can be used to hit a creature within range (such as one who was standing right behind the door).



                                      Because the weapon has now gone through the cover, the creature is no longer in cover for the purpose of this attack - just to be clear, any bonuses for cover (such as increased AC, better Dex Saving Throws or being untargetable) the creature had are being ignored by this attack.



                                      If the 16 rolled by the attacker earlier to hit the door is enough to hit the creature behind the door (without any bonuses from cover) they will take the remaining 2 damage. If the creature had an AC of 17 though they would manage to avoid any damage.



                                      This rule would make more sense when applied against a creature behind a fragile material, such as glass. (Due to glass only having an AC of 13 and being fragile, a Tiny section of that might only have 2 HP, meaning more damage is transferred to the target). It also makes sense thematically, Rules as Written would say standing behind a glass window or a curtain or even pulling the bedsheets over your head would count as cover, they might even count as Total cover, preventing the creature from being targetted. However, by using the Cleave Through Creatures rule in this way, we can make things more realistic “that window will not stop this arrow going through”, “those curtains or those bedsheets aren’t going to stop my sword from stabbing you”.






                                      share|improve this answer











                                      $endgroup$



                                      In Moments of Building Tension



                                      Whilst it may be better to abstract the damage as User Kyyshack said in a comment:




                                      If they roll an attack, what will players do if they don't get through in the first hit? Nothing has really changed so they'll just hit the door again. And Again. And Again. Until the door is broken. That's super boring and wastes time. It's much better to abstract that boring time away behind a single roll against a DC that will answer your question of "Do they break through quickly enough to catch the monsters off guard?"




                                      Using the rules for Object AC and Hit Points could be useful to help build tension. Rather than having the PC’s roll over and over again, you could have monsters roll to see if they damage a door the PC’s are on the other side of. Seeing creatures claw through a door or ripping boards off it would create more tension than if they rolled a nat 20 and broke it down in a single turn. The former option might allow players more time to react to the issue and respond to it, such as by barricading the door, escaping, preparing an ambush, etc.



                                      Additionally, having rickety old damaged doors or furniture can help to establish a theme. If players find a door that has already been damaged, they may want to investigate what caused it, and if that thing is still around. For example, if they found a door with a large axe wound in the middle of it like something out The Shining, players may wonder who was trying to get into this room, and why? Or, if they stumbled upon a door with a dozen puncture wounds in it like it was repeatedly stabbed by a dagger, they may investigate the cause - or not, but they’ll learn pretty quickly what caused those holes when they get hit in the back of the head by a falling flail trap.



                                      Partial Opening



                                      Thanks to user Jared Posch for highlighting the idea of accessibility in their comment:




                                      I would look at the accessibility of the lock, aka, can the players actually attack the lock. A door locked with a wooden beam would mean the beam is behind the door, so unless a player can accurately swing his sword down the middle, I'd say they don't do damage




                                      Rather than players having to completely open a door (such as by destroying it completely or by bashing through the door with a DC Strength check), players might partially damage a door.




                                      • For example, players might cut a hole around the locking mechanism to open a door, leaving it damaged but mostly intact - perhaps only removing 1 or 2 HP from the door.


                                      • Or, players may cut a hole in the door, creating an opening large enough for a Small creature to go through (or a Medium sized creature if they squeeze through the hole). This could be useful if they know they are being chased by Large creatures as it would slow them down. Alternatively, Small creatures like Kobolds might make holes in locked doors as it would slow down Medium sized creatures, hinger Large creatures but would not affect Small creatures like themselves (or they could make Tiny holes so they could squeeze through but larger creatures wouldn’t be able to).


                                      • Players may even put a hole in the door to gain access to the lock or door bar on the other side, allowing the door to be easily unlocked.



                                      Treat the door as though it was made up of smaller objects. So, whilst you may need to remove 18 HP to destroy a Medium sized resilient door completely, you may only take off 5 HP to put a Tiny hole in it or 10 to put a Small hole in it.



                                      Reinforced Doors



                                      User guildsbounty helpfully pointed out:




                                      Perhaps worth noting: some published adventures explicitly call out that a properly fortified door cannot be kicked in with a Strength Check, and must instead be destroyed by attacking it. The most recent example being in Ghosts of Saltmarsh.




                                      Having this clear distinction for Reinforced doors could be quite a useful tool. It may force players to make a decision between completely breaking this door, which would be very noisy and may take a long while, or finding another way through it. Here is what the Ghosts of Saltmarsh says about reinforced doors, page 157:




                                      It takes a character 1 hour to gather the required materials and reinforce one door. The time is cut in half if another character helps.
                                      A reinforced door cannot be broken through with a Strength check, but must be battered down (AC 15, 30 hit points, immunity to poison and psychic damage)




                                      Note that this rule is assuming the door is made out of wood, is being reinforced with wooden planks and nails and these materials are readily available.



                                      A possible way to calculate the health of a reinforced door is to add the health of the reinforcing objects to it and use the highest AC. For example, a Medium Resilient wood door (AC 15, HP 20) is being reinforced with Small Resilient planks of wood (AC 15, HP 10). The highest AC is 15 so the door has an AC of 15, 20 HP plus 10 HP equals 30 HP, giving us AC 15, HP 30 for the reinforced door in question. If we were using steel bars to reinforce the door instead, as they have an AC of 19, we would instead have AC 19, HP 30 for the reinforced door.



                                      So then, one possible situation where you would use AC and HP over a DC check is when a door has been reinforced, either by the players or by the inhabitants of a dungeon.



                                      Hitting Creatures Behind Cover



                                      This follows up from the idea of partial opening. I got a bit carried away but this highlights how object AC could be used in a completely different way than how a DC check is used:



                                      A creature can use any suitably large object as cover from an attack. A creature gains bonuses to their AC and Dexterity saving throws depending on the level of cover. A creature in total cover gains the bonus of it not being able to be targeted directly.



                                      If, for the purposes of an attack, we treat the door as a creature, we can use the Cleave Through Creatures optional rule in the DMG page 272:




                                      When a melee attack reduces an undamaged creature to 0 hit points, any excess damage from that attack might carry over to another creature nearby. The attacker targets another creature within reach and, if the original attack roll can hit it, applies any remaining damage to it




                                      So, using the example of a door, its a Medium sized resilient object made of wood, so it has 15 AC and 18 HP. However, we are targeting a Tiny section of it, so the AC is 15 and the HP is only 5. The attacker rolls a 16 and deals 7 damage, this hits the Tiny section of the door and reduces it to 0 HP. As we are using the Cleave Through Creatures rule, the attacker still has 2 damage left over which can be used to hit a creature within range (such as one who was standing right behind the door).



                                      Because the weapon has now gone through the cover, the creature is no longer in cover for the purpose of this attack - just to be clear, any bonuses for cover (such as increased AC, better Dex Saving Throws or being untargetable) the creature had are being ignored by this attack.



                                      If the 16 rolled by the attacker earlier to hit the door is enough to hit the creature behind the door (without any bonuses from cover) they will take the remaining 2 damage. If the creature had an AC of 17 though they would manage to avoid any damage.



                                      This rule would make more sense when applied against a creature behind a fragile material, such as glass. (Due to glass only having an AC of 13 and being fragile, a Tiny section of that might only have 2 HP, meaning more damage is transferred to the target). It also makes sense thematically, Rules as Written would say standing behind a glass window or a curtain or even pulling the bedsheets over your head would count as cover, they might even count as Total cover, preventing the creature from being targetted. However, by using the Cleave Through Creatures rule in this way, we can make things more realistic “that window will not stop this arrow going through”, “those curtains or those bedsheets aren’t going to stop my sword from stabbing you”.







                                      share|improve this answer














                                      share|improve this answer



                                      share|improve this answer








                                      edited Jun 2 at 13:31

























                                      answered May 24 at 15:46









                                      Liam MorrisLiam Morris

                                      3,08511 silver badges40 bronze badges




                                      3,08511 silver badges40 bronze badges

































                                          draft saved

                                          draft discarded




















































                                          Thanks for contributing an answer to Role-playing Games Stack Exchange!


                                          • Please be sure to answer the question. Provide details and share your research!

                                          But avoid …



                                          • Asking for help, clarification, or responding to other answers.

                                          • Making statements based on opinion; back them up with references or personal experience.


                                          Use MathJax to format equations. MathJax reference.


                                          To learn more, see our tips on writing great answers.




                                          draft saved


                                          draft discarded














                                          StackExchange.ready(
                                          function () {
                                          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2frpg.stackexchange.com%2fquestions%2f148590%2fshould-breaking-down-something-like-a-door-be-adjudicated-as-an-attempt-to-beat%23new-answer', 'question_page');
                                          }
                                          );

                                          Post as a guest















                                          Required, but never shown





















































                                          Required, but never shown














                                          Required, but never shown












                                          Required, but never shown







                                          Required, but never shown

































                                          Required, but never shown














                                          Required, but never shown












                                          Required, but never shown







                                          Required, but never shown







                                          -

                                          Popular posts from this blog

                                          Færeyskur hestur Heimild | Tengill | Tilvísanir | LeiðsagnarvalRossið - síða um færeyska hrossið á færeyskuGott ár hjá færeyska hestinum

                                          Image
                                          FæreyjarHestar færeyskahjaltlandshestinumíslenski hesturinnBretlandskolanámumenskuWikipediafæreyskuWikipediaRossið - síða um færeyska hrossið á færeysku Færeyskur hestur Úr Wikipediu, frjálsa alfræðiritinu Jump to navigation Jump to search Rani og Grani. Grani í vetrarfeldi. Færeyski hesturinn (færeyska: Føroyska rossið ) er hestur sem hefur lifað í Færeyjum í hundruði ára. Hann er smágerður, 120-132 cm á hæð, og helst skyldur hjaltlandshestinum. Hlutverk hans var að draga vagna og plóg og bera klyfjar. Hann hefur fjórar gangtegundir eins og íslenski hesturinn (þar með talið tölt) og er með fjölda litaafbrigði. Nú til dags er hann notaður til frístunda. Í lok 19. aldar voru til um 800 hross. Mö...
                                          Read more

                                          He _____ here since 1970 . Answer needed [closed]What does “since he was so high” mean?Meaning of “catch birds for”?How do I ensure “since” takes the meaning I want?“Who cares here” meaningWhat does “right round toward” mean?the time tense (had now been detected)What does the phrase “ring around the roses” mean here?Correct usage of “visited upon”Meaning of “foiled rail sabotage bid”It was the third time I had gone to Rome or It is the third time I had been to Rome

                                          Image
                                          Engineer refusing to file/disclose patents Extending the spectral theorem for bounded self adjoint operators to bounded normal operators Do varchar(max), nvarchar(max) and varbinary(max) columns affect select queries? Why is it that I can sometimes guess the next note? What linear sensor for a keyboard? Why don’t women say שלא עשני גויה and שפחה, according to Ashkenazim? Did arcade monitors have same pixel aspect ratio as TV sets? anything or something to eat Query about absorption line spectra Can I use my Chinese passport to enter China after I acquired another citizenship? Fuse symbol on toroidal transformer Create all possible words using a set or letters Does the Mind Blank spell prevent the target from being frightened? Can I sign legal documents with a smiley face? When quoting, must I also copy hyphens used to divide words that continue on the next line? ...
                                          Read more

                                          Slayer Innehåll Historia | Stil, komposition och lyrik | Bandets betydelse och framgångar | Sidoprojekt och samarbeten | Kontroverser | Medlemmar | Utmärkelser och nomineringar | Turnéer och festivaler | Diskografi | Referenser | Externa länkar | Navigeringsmenywww.slayer.net”Metal Massacre vol. 1””Metal Massacre vol. 3””Metal Massacre Volume III””Show No Mercy””Haunting the Chapel””Live Undead””Hell Awaits””Reign in Blood””Reign in Blood””Gold & Platinum – Reign in Blood””Golden Gods Awards Winners”originalet”Kerrang! Hall Of Fame””Slayer Looks Back On 37-Year Career In New Video Series: Part Two””South of Heaven””Gold & Platinum – South of Heaven””Seasons in the Abyss””Gold & Platinum - Seasons in the Abyss””Divine Intervention””Divine Intervention - Release group by Slayer””Gold & Platinum - Divine Intervention””Live Intrusion””Undisputed Attitude””Abolish Government/Superficial Love””Release “Slatanic Slaughter: A Tribute to Slayer” by Various Artists””Diabolus in Musica””Soundtrack to the Apocalypse””God Hates Us All””Systematic - Relationships””War at the Warfield””Gold & Platinum - War at the Warfield””Soundtrack to the Apocalypse””Gold & Platinum - Still Reigning””Metallica, Slayer, Iron Mauden Among Winners At Metal Hammer Awards””Eternal Pyre””Eternal Pyre - Slayer release group””Eternal Pyre””Metal Storm Awards 2006””Kerrang! Hall Of Fame””Slayer Wins 'Best Metal' Grammy Award””Slayer Guitarist Jeff Hanneman Dies””Bullet-For My Valentine booed at Metal Hammer Golden Gods Awards””Unholy Aliance””The End Of Slayer?””Slayer: We Could Thrash Out Two More Albums If We're Fast Enough...””'The Unholy Alliance: Chapter III' UK Dates Added”originalet”Megadeth And Slayer To Co-Headline 'Canadian Carnage' Trek”originalet”World Painted Blood””Release “World Painted Blood” by Slayer””Metallica Heading To Cinemas””Slayer, Megadeth To Join Forces For 'European Carnage' Tour - Dec. 18, 2010”originalet”Slayer's Hanneman Contracts Acute Infection; Band To Bring In Guest Guitarist””Cannibal Corpse's Pat O'Brien Will Step In As Slayer's Guest Guitarist”originalet”Slayer’s Jeff Hanneman Dead at 49””Dave Lombardo Says He Made Only $67,000 In 2011 While Touring With Slayer””Slayer: We Do Not Agree With Dave Lombardo's Substance Or Timeline Of Events””Slayer Welcomes Drummer Paul Bostaph Back To The Fold””Slayer Hope to Unveil Never-Before-Heard Jeff Hanneman Material on Next Album””Slayer Debut New Song 'Implode' During Surprise Golden Gods Appearance””Release group Repentless by Slayer””Repentless - Slayer - Credits””Slayer””Metal Storm Awards 2015””Slayer - to release comic book "Repentless #1"””Slayer To Release 'Repentless' 6.66" Vinyl Box Set””BREAKING NEWS: Slayer Announce Farewell Tour””Slayer Recruit Lamb of God, Anthrax, Behemoth + Testament for Final Tour””Slayer lägger ner efter 37 år””Slayer Announces Second North American Leg Of 'Final' Tour””Final World Tour””Slayer Announces Final European Tour With Lamb of God, Anthrax And Obituary””Slayer To Tour Europe With Lamb of God, Anthrax And Obituary””Slayer To Play 'Last French Show Ever' At Next Year's Hellfst””Slayer's Final World Tour Will Extend Into 2019””Death Angel's Rob Cavestany On Slayer's 'Farewell' Tour: 'Some Of Us Could See This Coming'””Testament Has No Plans To Retire Anytime Soon, Says Chuck Billy””Anthrax's Scott Ian On Slayer's 'Farewell' Tour Plans: 'I Was Surprised And I Wasn't Surprised'””Slayer””Slayer's Morbid Schlock””Review/Rock; For Slayer, the Mania Is the Message””Slayer - Biography””Slayer - Reign In Blood”originalet”Dave Lombardo””An exclusive oral history of Slayer”originalet”Exclusive! Interview With Slayer Guitarist Jeff Hanneman”originalet”Thinking Out Loud: Slayer's Kerry King on hair metal, Satan and being polite””Slayer Lyrics””Slayer - Biography””Most influential artists for extreme metal music””Slayer - Reign in Blood””Slayer guitarist Jeff Hanneman dies aged 49””Slatanic Slaughter: A Tribute to Slayer””Gateway to Hell: A Tribute to Slayer””Covered In Blood””Slayer: The Origins of Thrash in San Francisco, CA.””Why They Rule - #6 Slayer”originalet”Guitar World's 100 Greatest Heavy Metal Guitarists Of All Time”originalet”The fans have spoken: Slayer comes out on top in readers' polls”originalet”Tribute to Jeff Hanneman (1964-2013)””Lamb Of God Frontman: We Sound Like A Slayer Rip-Off””BEHEMOTH Frontman Pays Tribute To SLAYER's JEFF HANNEMAN””Slayer, Hatebreed Doing Double Duty On This Year's Ozzfest””System of a Down””Lacuna Coil’s Andrea Ferro Talks Influences, Skateboarding, Band Origins + More””Slayer - Reign in Blood””Into The Lungs of Hell””Slayer rules - en utställning om fans””Slayer and Their Fans Slashed Through a No-Holds-Barred Night at Gas Monkey””Home””Slayer””Gold & Platinum - The Big 4 Live from Sofia, Bulgaria””Exclusive! Interview With Slayer Guitarist Kerry King””2008-02-23: Wiltern, Los Angeles, CA, USA””Slayer's Kerry King To Perform With Megadeth Tonight! - Oct. 21, 2010”originalet”Dave Lombardo - Biography”Slayer Case DismissedArkiveradUltimate Classic Rock: Slayer guitarist Jeff Hanneman dead at 49.”Slayer: "We could never do any thing like Some Kind Of Monster..."””Cannibal Corpse'S Pat O'Brien Will Step In As Slayer'S Guest Guitarist | The Official Slayer Site”originalet”Slayer Wins 'Best Metal' Grammy Award””Slayer Guitarist Jeff Hanneman Dies””Kerrang! Awards 2006 Blog: Kerrang! Hall Of Fame””Kerrang! Awards 2013: Kerrang! Legend”originalet”Metallica, Slayer, Iron Maien Among Winners At Metal Hammer Awards””Metal Hammer Golden Gods Awards””Bullet For My Valentine Booed At Metal Hammer Golden Gods Awards””Metal Storm Awards 2006””Metal Storm Awards 2015””Slayer's Concert History””Slayer - Relationships””Slayer - Releases”Slayers officiella webbplatsSlayer på MusicBrainzOfficiell webbplatsSlayerSlayerr1373445760000 0001 1540 47353068615-5086262726cb13906545x(data)6033143kn20030215029

                                          Image
                                          SlayerMusikgrupper bildade 1981Amerikanska thrash metal-grupper amerikansktthrash metalHuntington Park1981gitarristernaJeff HannemanKerry KingbasistenTom ArayatrummisenDave LombardoGary HoltPaul Bostaphcertifierats med guldMetallicaAnthraxMegadeththrash metal1986extrema metalgenrerdeath metal22 januari2018USAKanadaEuropaHuntington ParkKalifornien1981gitarristernaJeff HannemanKerry KingbassångDave Lombardoheavy metalbrittiskaIron MaidenJudas PriestthrashMetallicaRattSteeler1982demoundergroundMetal Blade1983high schoolGene HoglanDeathStrapping Young Ladkassettvinyl1984LondonMarquee Club1984Eldorado StudiosTrack Record StudiosLos Angelesmastrade1985CDCombat Recordsextreme metalVenomExodusStudio 54 club1985VHSCombat RecordsBelgienUFORick RubinDef Jam Recordship hoprockakterThe Black CrowesRun–D.M.C.LL Cool JBeastie BoysthrashbpmAngel of DeathRaining BloodAndy WallaceHowie Weinberg1986bildskivaBillboard 200RIAAMetal HammerKerrang!Angela Gossowdeath metalArch Enemythrash metalOverk...
                                          Read more