Why aren't air breathing engines used as small first stages
$begingroup$
I am wondering why we don't use jet engines as first stages. Most small rockets, like the Electron, can lift off with a small thrust. In the Electron's case, 192 kN. Why can't we replace the 9 Rutherford engines on the Electron with a/some jet engine(s), like a ram/scramjet with an equal amount of thrust? In a rocket/spaceflight simulator (KSP), I have tried replacing the first stage with a small first stage with a hybrid jet engine with 200 kN of thrust. This works, so why doesn't NASA or other aerospace companies use this?
engines rocketlab electron kerbal-space-program ramjet
New contributor
$endgroup$
|
show 3 more comments
$begingroup$
I am wondering why we don't use jet engines as first stages. Most small rockets, like the Electron, can lift off with a small thrust. In the Electron's case, 192 kN. Why can't we replace the 9 Rutherford engines on the Electron with a/some jet engine(s), like a ram/scramjet with an equal amount of thrust? In a rocket/spaceflight simulator (KSP), I have tried replacing the first stage with a small first stage with a hybrid jet engine with 200 kN of thrust. This works, so why doesn't NASA or other aerospace companies use this?
engines rocketlab electron kerbal-space-program ramjet
New contributor
$endgroup$
$begingroup$
Someone else will post a detailed answer, but humans have not yet been able to make a working scramjet. That limits air breathing engines to < Mach 5 which is not a big help. Conventional first stages simply work better.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Oh, in the KSP simulator, the hybrid jet engine can go up to Mach 4, where it loses thrust. However, it has a good high-altitude performance. Is there any jet engine that can do this?
$endgroup$
– 18ballz
2 hours ago
$begingroup$
The highest altitude high-speed aircraft engine I know of is the Pratt and Whitney J58. It could run at around Mach 3 at around 85,000 ft. There are some developments like the Sabre engine that could do better if they actually are built and work.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
That's good! So what thrust does the J58 have?
$endgroup$
– 18ballz
2 hours ago
$begingroup$
Roughly 30,000 lbf.
$endgroup$
– Organic Marble
2 hours ago
|
show 3 more comments
$begingroup$
I am wondering why we don't use jet engines as first stages. Most small rockets, like the Electron, can lift off with a small thrust. In the Electron's case, 192 kN. Why can't we replace the 9 Rutherford engines on the Electron with a/some jet engine(s), like a ram/scramjet with an equal amount of thrust? In a rocket/spaceflight simulator (KSP), I have tried replacing the first stage with a small first stage with a hybrid jet engine with 200 kN of thrust. This works, so why doesn't NASA or other aerospace companies use this?
engines rocketlab electron kerbal-space-program ramjet
New contributor
$endgroup$
I am wondering why we don't use jet engines as first stages. Most small rockets, like the Electron, can lift off with a small thrust. In the Electron's case, 192 kN. Why can't we replace the 9 Rutherford engines on the Electron with a/some jet engine(s), like a ram/scramjet with an equal amount of thrust? In a rocket/spaceflight simulator (KSP), I have tried replacing the first stage with a small first stage with a hybrid jet engine with 200 kN of thrust. This works, so why doesn't NASA or other aerospace companies use this?
engines rocketlab electron kerbal-space-program ramjet
engines rocketlab electron kerbal-space-program ramjet
New contributor
New contributor
New contributor
asked 2 hours ago
18ballz18ballz
157
157
New contributor
New contributor
$begingroup$
Someone else will post a detailed answer, but humans have not yet been able to make a working scramjet. That limits air breathing engines to < Mach 5 which is not a big help. Conventional first stages simply work better.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Oh, in the KSP simulator, the hybrid jet engine can go up to Mach 4, where it loses thrust. However, it has a good high-altitude performance. Is there any jet engine that can do this?
$endgroup$
– 18ballz
2 hours ago
$begingroup$
The highest altitude high-speed aircraft engine I know of is the Pratt and Whitney J58. It could run at around Mach 3 at around 85,000 ft. There are some developments like the Sabre engine that could do better if they actually are built and work.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
That's good! So what thrust does the J58 have?
$endgroup$
– 18ballz
2 hours ago
$begingroup$
Roughly 30,000 lbf.
$endgroup$
– Organic Marble
2 hours ago
|
show 3 more comments
$begingroup$
Someone else will post a detailed answer, but humans have not yet been able to make a working scramjet. That limits air breathing engines to < Mach 5 which is not a big help. Conventional first stages simply work better.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Oh, in the KSP simulator, the hybrid jet engine can go up to Mach 4, where it loses thrust. However, it has a good high-altitude performance. Is there any jet engine that can do this?
$endgroup$
– 18ballz
2 hours ago
$begingroup$
The highest altitude high-speed aircraft engine I know of is the Pratt and Whitney J58. It could run at around Mach 3 at around 85,000 ft. There are some developments like the Sabre engine that could do better if they actually are built and work.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
That's good! So what thrust does the J58 have?
$endgroup$
– 18ballz
2 hours ago
$begingroup$
Roughly 30,000 lbf.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Someone else will post a detailed answer, but humans have not yet been able to make a working scramjet. That limits air breathing engines to < Mach 5 which is not a big help. Conventional first stages simply work better.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Someone else will post a detailed answer, but humans have not yet been able to make a working scramjet. That limits air breathing engines to < Mach 5 which is not a big help. Conventional first stages simply work better.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Oh, in the KSP simulator, the hybrid jet engine can go up to Mach 4, where it loses thrust. However, it has a good high-altitude performance. Is there any jet engine that can do this?
$endgroup$
– 18ballz
2 hours ago
$begingroup$
Oh, in the KSP simulator, the hybrid jet engine can go up to Mach 4, where it loses thrust. However, it has a good high-altitude performance. Is there any jet engine that can do this?
$endgroup$
– 18ballz
2 hours ago
$begingroup$
The highest altitude high-speed aircraft engine I know of is the Pratt and Whitney J58. It could run at around Mach 3 at around 85,000 ft. There are some developments like the Sabre engine that could do better if they actually are built and work.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
The highest altitude high-speed aircraft engine I know of is the Pratt and Whitney J58. It could run at around Mach 3 at around 85,000 ft. There are some developments like the Sabre engine that could do better if they actually are built and work.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
That's good! So what thrust does the J58 have?
$endgroup$
– 18ballz
2 hours ago
$begingroup$
That's good! So what thrust does the J58 have?
$endgroup$
– 18ballz
2 hours ago
$begingroup$
Roughly 30,000 lbf.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Roughly 30,000 lbf.
$endgroup$
– Organic Marble
2 hours ago
|
show 3 more comments
2 Answers
2
active
oldest
votes
$begingroup$
Take a look at the SABRE engine. The goal is to achieve single stage to orbit with a hybrid engine capable of breathing air at low altitude but switching to stored oxidizer and operating like a rocket when it is no longer practical to use ambient air.
The limitations of an air-breathing engine for space launch are that
- You can't go very high before the air gets very thin - not a lot of oxygen
- You can't go very fast before things start to get very hot from either friction or compression or both.
That said, the SABRE attempts to address these problems to a degree with some rather innovative ideas.
$endgroup$
add a comment |
$begingroup$
There are two major barriers: one is that thrust-to-weight ratio of jet engines is pretty poor (2 J58s massing more than 15 times what 9 Rutherfords do), the other is that it's hard to make an engine that performs efficiently over the wide range of speeds and altitudes that a first stage wants to cover.
That said, Boeing at one point toyed with a concept using recoverable jet-powered modules as the first stage of a three-stage-to-orbit reusable launcher.
$endgroup$
$begingroup$
I'm not advocating the concept, but you might save some mass by not carrying oxidizer for the jet engines.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Absolutely -- that's the most attractive thing about using jet engines. On orbital ascent, though, the useful run time of air-breathers is so short that the added weight of the engine almost eats up the oxidizer savings.
$endgroup$
– Russell Borogove
2 hours ago
$begingroup$
Agree completely.
$endgroup$
– Organic Marble
2 hours ago
add a comment |
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "508"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
18ballz is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fspace.stackexchange.com%2fquestions%2f35540%2fwhy-arent-air-breathing-engines-used-as-small-first-stages%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
Take a look at the SABRE engine. The goal is to achieve single stage to orbit with a hybrid engine capable of breathing air at low altitude but switching to stored oxidizer and operating like a rocket when it is no longer practical to use ambient air.
The limitations of an air-breathing engine for space launch are that
- You can't go very high before the air gets very thin - not a lot of oxygen
- You can't go very fast before things start to get very hot from either friction or compression or both.
That said, the SABRE attempts to address these problems to a degree with some rather innovative ideas.
$endgroup$
add a comment |
$begingroup$
Take a look at the SABRE engine. The goal is to achieve single stage to orbit with a hybrid engine capable of breathing air at low altitude but switching to stored oxidizer and operating like a rocket when it is no longer practical to use ambient air.
The limitations of an air-breathing engine for space launch are that
- You can't go very high before the air gets very thin - not a lot of oxygen
- You can't go very fast before things start to get very hot from either friction or compression or both.
That said, the SABRE attempts to address these problems to a degree with some rather innovative ideas.
$endgroup$
add a comment |
$begingroup$
Take a look at the SABRE engine. The goal is to achieve single stage to orbit with a hybrid engine capable of breathing air at low altitude but switching to stored oxidizer and operating like a rocket when it is no longer practical to use ambient air.
The limitations of an air-breathing engine for space launch are that
- You can't go very high before the air gets very thin - not a lot of oxygen
- You can't go very fast before things start to get very hot from either friction or compression or both.
That said, the SABRE attempts to address these problems to a degree with some rather innovative ideas.
$endgroup$
Take a look at the SABRE engine. The goal is to achieve single stage to orbit with a hybrid engine capable of breathing air at low altitude but switching to stored oxidizer and operating like a rocket when it is no longer practical to use ambient air.
The limitations of an air-breathing engine for space launch are that
- You can't go very high before the air gets very thin - not a lot of oxygen
- You can't go very fast before things start to get very hot from either friction or compression or both.
That said, the SABRE attempts to address these problems to a degree with some rather innovative ideas.
answered 1 hour ago
Anthony XAnthony X
9,50513681
9,50513681
add a comment |
add a comment |
$begingroup$
There are two major barriers: one is that thrust-to-weight ratio of jet engines is pretty poor (2 J58s massing more than 15 times what 9 Rutherfords do), the other is that it's hard to make an engine that performs efficiently over the wide range of speeds and altitudes that a first stage wants to cover.
That said, Boeing at one point toyed with a concept using recoverable jet-powered modules as the first stage of a three-stage-to-orbit reusable launcher.
$endgroup$
$begingroup$
I'm not advocating the concept, but you might save some mass by not carrying oxidizer for the jet engines.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Absolutely -- that's the most attractive thing about using jet engines. On orbital ascent, though, the useful run time of air-breathers is so short that the added weight of the engine almost eats up the oxidizer savings.
$endgroup$
– Russell Borogove
2 hours ago
$begingroup$
Agree completely.
$endgroup$
– Organic Marble
2 hours ago
add a comment |
$begingroup$
There are two major barriers: one is that thrust-to-weight ratio of jet engines is pretty poor (2 J58s massing more than 15 times what 9 Rutherfords do), the other is that it's hard to make an engine that performs efficiently over the wide range of speeds and altitudes that a first stage wants to cover.
That said, Boeing at one point toyed with a concept using recoverable jet-powered modules as the first stage of a three-stage-to-orbit reusable launcher.
$endgroup$
$begingroup$
I'm not advocating the concept, but you might save some mass by not carrying oxidizer for the jet engines.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Absolutely -- that's the most attractive thing about using jet engines. On orbital ascent, though, the useful run time of air-breathers is so short that the added weight of the engine almost eats up the oxidizer savings.
$endgroup$
– Russell Borogove
2 hours ago
$begingroup$
Agree completely.
$endgroup$
– Organic Marble
2 hours ago
add a comment |
$begingroup$
There are two major barriers: one is that thrust-to-weight ratio of jet engines is pretty poor (2 J58s massing more than 15 times what 9 Rutherfords do), the other is that it's hard to make an engine that performs efficiently over the wide range of speeds and altitudes that a first stage wants to cover.
That said, Boeing at one point toyed with a concept using recoverable jet-powered modules as the first stage of a three-stage-to-orbit reusable launcher.
$endgroup$
There are two major barriers: one is that thrust-to-weight ratio of jet engines is pretty poor (2 J58s massing more than 15 times what 9 Rutherfords do), the other is that it's hard to make an engine that performs efficiently over the wide range of speeds and altitudes that a first stage wants to cover.
That said, Boeing at one point toyed with a concept using recoverable jet-powered modules as the first stage of a three-stage-to-orbit reusable launcher.
edited 2 hours ago
answered 2 hours ago
Russell BorogoveRussell Borogove
89.3k3300384
89.3k3300384
$begingroup$
I'm not advocating the concept, but you might save some mass by not carrying oxidizer for the jet engines.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Absolutely -- that's the most attractive thing about using jet engines. On orbital ascent, though, the useful run time of air-breathers is so short that the added weight of the engine almost eats up the oxidizer savings.
$endgroup$
– Russell Borogove
2 hours ago
$begingroup$
Agree completely.
$endgroup$
– Organic Marble
2 hours ago
add a comment |
$begingroup$
I'm not advocating the concept, but you might save some mass by not carrying oxidizer for the jet engines.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Absolutely -- that's the most attractive thing about using jet engines. On orbital ascent, though, the useful run time of air-breathers is so short that the added weight of the engine almost eats up the oxidizer savings.
$endgroup$
– Russell Borogove
2 hours ago
$begingroup$
Agree completely.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
I'm not advocating the concept, but you might save some mass by not carrying oxidizer for the jet engines.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
I'm not advocating the concept, but you might save some mass by not carrying oxidizer for the jet engines.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Absolutely -- that's the most attractive thing about using jet engines. On orbital ascent, though, the useful run time of air-breathers is so short that the added weight of the engine almost eats up the oxidizer savings.
$endgroup$
– Russell Borogove
2 hours ago
$begingroup$
Absolutely -- that's the most attractive thing about using jet engines. On orbital ascent, though, the useful run time of air-breathers is so short that the added weight of the engine almost eats up the oxidizer savings.
$endgroup$
– Russell Borogove
2 hours ago
$begingroup$
Agree completely.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Agree completely.
$endgroup$
– Organic Marble
2 hours ago
add a comment |
18ballz is a new contributor. Be nice, and check out our Code of Conduct.
18ballz is a new contributor. Be nice, and check out our Code of Conduct.
18ballz is a new contributor. Be nice, and check out our Code of Conduct.
18ballz is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Space Exploration Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fspace.stackexchange.com%2fquestions%2f35540%2fwhy-arent-air-breathing-engines-used-as-small-first-stages%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
$begingroup$
Someone else will post a detailed answer, but humans have not yet been able to make a working scramjet. That limits air breathing engines to < Mach 5 which is not a big help. Conventional first stages simply work better.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
Oh, in the KSP simulator, the hybrid jet engine can go up to Mach 4, where it loses thrust. However, it has a good high-altitude performance. Is there any jet engine that can do this?
$endgroup$
– 18ballz
2 hours ago
$begingroup$
The highest altitude high-speed aircraft engine I know of is the Pratt and Whitney J58. It could run at around Mach 3 at around 85,000 ft. There are some developments like the Sabre engine that could do better if they actually are built and work.
$endgroup$
– Organic Marble
2 hours ago
$begingroup$
That's good! So what thrust does the J58 have?
$endgroup$
– 18ballz
2 hours ago
$begingroup$
Roughly 30,000 lbf.
$endgroup$
– Organic Marble
2 hours ago